※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 12210-4 は、技術委員会 ISO/TC 96, クレーン、小委員会 8, ジブ クレーンによって作成されました。
ISO 12210 のこの部分の付属書 A は、情報提供のみを目的としています。
1 スコープ
ISO 12210 のこの部分は、ISO 4306-1 で定義されているジブ クレーンの稼働中および稼働停止中の状態でのアンカー装置に関する特定の要件を規定しています。 ISO 12210 の一部。
2 規範的参照
以下の規格には規定が含まれており、このテキストで参照することにより、ISO 12210 のこの部分の規定を構成します。発行の時点で、示された版は有効でした。すべての規格は改訂される可能性があり、ISO 12210 のこの部分に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 8686-1:1989, クレーン — 荷重および荷重の組み合わせの設計原則 — Part 1: 一般。
- ISO 12210-1: — 1 、クレーン — 稼働中および稼働していない状態の固定装置 — Part 1: 一般。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 12210-4 was prepared by Technical Committee ISO/TC 96, Cranes, Subcommittee 8, Jib cranes.
Annex A of this part of ISO 12210 is for information only.
1 Scope
This part of ISO 12210 provides specific requirements for anchoring devices for in-service and out-of-service conditions for jib cranes as defined in ISO 4306-1, other than tower cranes, mobile cranes and railway cranes that are otherwise generally covered by other parts of ISO 12210.
2 Normative reference(s)
The following standards contain provisions, which, through reference in this text constitute provisions of this part of ISO 12210. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this part of ISO 12210 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of the IEC and ISO maintain registers of currently valid International Standards.
- ISO 8686-1: 1989, Cranes — Design principles for loads and load combinations — Part 1: General.
- ISO 12210-1: — 1 , Cranes — Anchoring devices for in-service and out-of-service conditions — Part 1: General.
Annex A
Bibliography
| [1] | ISO 4302:1981, Cranes — Wind load assessment. |
| [2] | ISO 4306-1:1990, Cranes — Vocabulary — Part 1: General. |