※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 3 に規定されている規則に従って起草されています。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
ISO 12215 のこのパートの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 12215-4 は技術委員会 ISO/TC 188, Small craftによって作成されました。
ISO 12215 は、以下の部分で構成されており、一般的なタイトルは「小型船 — 船体の構造と寸法」です。
- Part 1: 材料: 熱硬化性樹脂、ガラス繊維強化材、参照ラミネート
- Part 2: 材料: サンドイッチ構造のコア材料、埋め込み材料
- Part 3: 材料: 鋼、アルミニウム合金、木材、その他の材料
- Part 4: ワークショップと製造
- Part 5: 設計圧力、設計応力、寸法決定
- Part 6: 構造配置と詳細
1 スコープ
ISO 12215 のこの部分では、ワークショップの条件、材料の保管と取り扱い、およびクラフトの製造に関する要件を指定しています。これは、ISO 8666 に準拠した長さ ( L H ) が最大 24 m の小型船に適用されます。
ISO 12215 のこの部分は、健康と安全の要件をカバーしていません。
注記ISO 12215 のこの部分を作成する根本的な理由は、ワークショップの条件が娯楽用舟艇の機械的短期的および長期的特性に大きな影響を与えること、および ISO 12215-5 による寸法決定が適切な条件に基づいていることです。使用される材料と適用される製造プロセスについて。
2 参考文献
以下の規範文書には、このテキストで参照することにより、ISO 12215 のこの部分の規定を構成する規定が含まれています。ただし、ISO 12215 のこの部分に基づく契約の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 8666:— 1) 、小型船—主要データ
- ISO 12215-1:2000, 小型船 — 船体構造および寸法 — Part 1: 材料: 熱硬化性樹脂、ガラス繊維強化材、参照ラミネート
- ISO 12215-3:2002, 小型船 — 船体構造および寸法 — Part 3: 材料: 鋼、アルミニウム合金、木材、その他の材料
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 12215 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12215-4 was prepared by Technical Committee ISO/TC 188, Small craft.
ISO 12215 consists of the following parts, under the general title Small craft — Hull construction and scantlings:
- Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate
- Part 2: Materials: Core materials for sandwich construction, embedded materials
- Part 3: Materials: Steel, aluminium alloys, wood, other materials
- Part 4: Workshop and manufacturing
- Part 5: Design pressures, design stresses, scantling determination
- Part 6: Structural arrangements and details
1 Scope
This part of ISO 12215 specifies workshop conditions, material storage and handling, and requirements for the manufacturing of the craft. It applies, to small craft with a ( LH) length according to ISO 8666 of up to 24 m.
This part of ISO 12215 does not cover health and safety requirements.
NOTE The underlying reason for preparing this part of ISO 12215 is that workshop conditions have a significant influence on the mechanical short- and long-term properties of recreational craft and that the scantling determination according to ISO 12215-5 is based on conditions that are appropriate for the material used as well as the manufacturing process applied.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of ISO 12215. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 12215 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 8666:— 1) , Small craft — Principal data
- ISO 12215-1:2000, Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate
- ISO 12215-3:2002, Small craft — Hull construction and scantlings — Part 3: Materials: Steel, aluminium alloys, wood, other materials