※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 12274 は、技術委員会 ISO/TC 20, 航空機および宇宙船、小委員会 SC 4, 航空宇宙ファスナー システムによって作成されました。
序章
この国際規格で指定されている寸法は、ISO 5858 の調達仕様の要件を満たすように決定されています。
1 スコープ
この国際規格は、フローティング、自動調心、シングル ラグ アンカー ナットの寸法を指定します。MJ ねじと、上部を円形に形成することによって達成されるセルフロック機能を備えています。分類は 900 MPa 1)/235 °C です。 2) 、900 MPa 1)/315 °C 2)および 900 MPa 1)/425 °C 2) .
この国際規格は、航空宇宙製品規格の編集にのみ適用されます。
2 参考文献
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 5855-2:1988, 航空宇宙 — MJ スレッド — 2: ボルトとナットの制限寸法。
- ISO 5858:1991, 航空宇宙 — 最大動作温度が 425 °C 以下のセルフロック ナット — 調達仕様。
- ISO 8788:1987, 航空宇宙 - ファスナー - ナットの形状と位置の公差。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 12274 was prepared by Technical Committee ISO/TC 20, Aircarft and space vehicles, Subcommittee SC 4, Aerospace fastener systems.
Introduction
The dimensions specified in this International Standard have been determined to satisfy the requirements of the procurement specification of ISO 5858.
1 Scope
This International Standard specifies the dimensions of floating, self-aligning, single lug anchor nuts, with MJ threads and a self-locking feature achieved by forming the upper portion out-of-round, of classifications: 900 MPa 1)/235 °C 2) , 900 MPa 1)/315 °C 2) and 900 MPa 1)/425 °C 2) .
This International Standard is only applicable for the compilation of aerospace product standards.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 5855-2:1988, Aerospace — MJ threads — 2: Limit dimensions for bolts and nuts.
- ISO 5858:1991, Aerospace — Self-locking nuts with maximum operating temperature less than or equal to 425 °C — Procurement specification.
- ISO 8788:1987, Aerospace — Fasteners — Tolerances of form and position for nuts.