※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令、 Part 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って作成されました 。 www.iso.org/directives
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受け取った特許宣言の ISO リストに記載されます。 www.iso.org/patents
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
この文書を担当する委員会は、ISO/TC 94, 個人の安全 — 保護服および機器、小委員会 SC 6, 目および顔の保護です。
この ISO 12311:2013 の修正版には、次の修正が組み込まれています。
- 9.7.3.1 の第 2 段落が追加されました。
1 スコープ
この国際規格は、ISO 12312 (すべての部分) で与えられたサングラスの特性を決定するための参照試験方法を指定します。すべてのサングラスおよび関連するアイウェアに適用できます。
同等であることが証明された場合、他の試験方法を使用することができます。
2 参考文献
以下のドキュメントの全体または一部は、このドキュメントで規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 37, ゴム、加硫または熱可塑性 — 引張応力-ひずみ特性の測定
- ISO 48, ゴム、加硫または熱可塑性 — 硬度の測定 (10 IRHD と 100 IRHD の間の硬度)
- ISO 1042:1998, 実験用ガラス器具 — ワンマークのメスフラスコ
- ISO 3696:1987, 分析ラボ用水 — 仕様および試験方法
- ISO 4007, 個人用保護具 — 目と顔の保護 — 語彙
- ISO 8596, 眼科光学 — 視力検査 — 標準視標とその表示
- ISO 11664-1, 測色 — Part 1: CIE 標準測色オブザーバー
- ISO 11664-2, 測色 — Part 2: CIE 標準光源
- ISO 12312-1:2013, 目と顔の保護 — サングラスおよび関連するアイウェア — Part 1: 一般的な使用のためのサングラス
- ISO/IEC Guide 98-3:2008, 測定の不確かさ — Part 3: 測定における不確かさの表現へのガイド (GUM:1995)
3 用語と定義
このドキュメントの目的のために、ISO 4007 で指定されている用語と定義が適用されます。
参考文献
| 1 | ISO 8598-1, 光学および光学機器 — 焦点距離計 — Part 1: 眼鏡レンズの測定に使用される汎用機器 |
| 2 | ISO 8624, 眼科用オプティクス - 眼鏡フレーム - 測定システムと用語 |
| 3 | ISO 12870, 眼科用オプティクス - 眼鏡フレーム - 要件と試験方法 |
| 4 | ISO/IEC 17025, 試験所および校正所の能力に関する一般要件 |
| 5 | ISO/TR 28980, 眼科光学 - 眼鏡レンズ - レンズ度数測定に影響するパラメータ |
| 6 | CIE 85:1989, 太陽スペクトル放射照度 |
| 7 | Moon P., Proposed standard solar-radiation curve for engineering use, J, Franklin Inst, 230 (1940), 583-617ICNIRP, 紫外線暴露限度に関するガイドライン。健康物理。 1996年、71ページ。 978 |
| 8 | N on -I onizingRadiationProtection (ICNIRP)に関する国際委員he 、180 nm から 400 nm の間の波長の紫外線放射 (インコヒーレント光放射) への曝露の制限に関するガイドライン。健康物理。 2004, 87(2) pp. 171–186 |
| 9 | ACGIH, 化学物質および物理的作用物質の限界値、1992-1993 |
| 10 | Commission Internationale de l'Eclairag出版物 15. Colorimetry, 第 3 版、2004 年 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 6, Eye and face protection.
This corrected version of ISO 12311:2013 incorporates the following correction:
- the second paragraph of 9.7.3.1 has been added.
1 Scope
This International Standard specifies reference test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear.
Other test methods may be used if proven to be equivalent.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 37, Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
- ISO 48, Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
- ISO 1042:1998, Laboratory glassware — One-mark volumetric flasks
- ISO 3696:1987, Water for analytical laboratory use — Specification and test methods
- ISO 4007, Personal protective equipment — Eye and face protection — Vocabulary
- ISO 8596, Ophthalmic optics — Visual acuity testing — Standard optotype and its presentation
- ISO 11664-1, Colorimetry — Part 1: CIE standard colorimetric observers
- ISO 11664-2, Colorimetry — Part 2: CIE standard illuminants
- ISO 12312-1:2013, Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use
- ISO/IEC Guide 98-3:2008, Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 4007 apply.
Bibliography
| 1 | ISO 8598-1, Optics and optical instruments — Focimeters — Part 1: General purpose instruments used for measuring spectacle lenses |
| 2 | ISO 8624, Ophthalmic optics — Spectacle frames — Measuring system and terminology |
| 3 | ISO 12870, Ophthalmic optics — Spectacle frames — Requirements and test methods |
| 4 | ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories |
| 5 | ISO/TR 28980, Ophthalmic optics — Spectacle lenses — Parameters affecting lens power measurement |
| 6 | CIE 85:1989, Solar spectral irradiance |
| 7 | Moon P., Proposed standard solar-radiation curves for engineering use, J, Franklin Inst, 230 (1940), 583-617ICNIRP, Guidelines on UV radiation exposure limits. Health Phys. 1996, 71 p. 978 |
| 8 | The International Commission on Non-Ionizing Radiation Protection (ICNIRP), Guidelines on limits of exposure to ultraviolet radiation of wavelengths between 180 nm and 400 nm (incoherent optical radiation). Health Phys. 2004, 87 (2) pp. 171–186 |
| 9 | ACGIH, Threshold limit values for chemical substances and physical agents, 1992-1993 |
| 10 | Commission Internationale de l’Éclairage. Publication 15. Colorimetry, Third Edition, 2004 |