この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 12344 は、技術委員会 ISO/TC 163, 建築環境における熱性能およびエネルギー使用、小委員会 SC 1, 試験および測定方法によって作成されました。
ISO 12344 は、EN 12089:1997, 技術委員会 CEN/TC 88, 断熱材および製品によって作成されたものに基づいています。でも、
- 6.4, 試験片の調整、
- 7.1, 試験条件、および
- 第10条、試験報告書、
熱帯諸国の条件を反映するように変更されています。
序章
この国際規格は、技術委員会 CEN/TC 88 によって作成された EN 12089:1997, 熱絶縁材料および製品に基づいており、熱帯諸国でのコンディショニングおよび試験条件を参照して ISO/TC 163/SC 1 によって修正されています。
この国際規格は、ISO によって採用されている既存の欧州規格に基づいて、試験方法を指定する一連の文書の 1 つです。この規格の「パッケージ」には、次の相互に関連するドキュメントのグループが含まれています。
| 国際的 デフォルト | 題名 | それぞれ EN規格 |
|---|---|---|
| ISO12344 | 建物用途の断熱製品 — 曲げ挙動の測定 | EN12089 |
| ISO12968 | 建物用途の断熱製品 — 外部断熱複合システム (ETICS) のプルオフ抵抗の測定 (フォームブロック試験) | EN13495 |
| ISO29465 | 建築用断熱製品 - 長さと幅の決定 | EN822 |
| ISO29466 | 建築用途の断熱製品 — 厚さの測定 | EN823 |
| ISO29467 | 建築用断熱製品 — 直角度の測定 | EN824 |
| ISO29468 | 建築用断熱製品 — 平面度の測定 | EN825 |
| ISO29469 | 建物用途の断熱製品 — 圧縮挙動の測定 | EN826 |
| ISO29470 | 建築用途の断熱製品 — 見かけ密度の測定 | EN1602 |
| ISO29471 | 建物用途の断熱製品 — 一定の通常の実験室条件 (23 °C/相対湿度 50 %) での寸法安定性の測定 | EN1603 |
| ISO29472 | 建築用途の断熱製品 — 指定された温度および湿度条件下での寸法安定性の測定 | EN1604 |
| ISO29764 | 建築用途の断熱製品 — 指定された圧縮荷重および温度条件下での変形の測定 | EN1605 |
| ISO29765 | 建築用途の断熱製品 — 面に垂直な引張強度の測定 | EN1607 |
| ISO29766 | 建築用途の断熱製品 — 面に平行な引張強度の測定 | EN1608 |
| ISO29767 | 建築用途の断熱製品 — 部分浸漬による短期吸水量の測定 | EN1609 |
| ISO29768 | 建築用途の断熱製品 — 試験片の直線寸法の決定 | EN12085 |
| ISO29769 | 建物用途の断熱製品 — 点荷重下での挙動の決定 | EN12430 |
| ISO29770 | 建築用途の断熱製品 — 浮床断熱製品の厚さの決定 | EN12431 |
| ISO29771 | 建築用断熱材 — 有機含有量の測定 | EN13820 |
| ISO29803 | 建物用途の断熱製品 — 外部断熱複合システム (ETICS) の耐衝撃性の測定 | EN13497 |
| ISO29804 | 建築用途の断熱製品 — 断熱材への接着剤およびベース コートの引張接着強さの測定 | EN13494 |
| ISO29805 | 建物用途の断熱製品 — ガラス繊維メッシュの機械的特性の測定 | EN13496 |
1 スコープ
この国際規格は、3 点荷重の作用下での実物大製品 (方法 A) および試験片 (方法 B) の曲げ挙動を決定するための装置と手順を指定します。建築用断熱製品に適用可能です。
この試験は、製品の曲げ強度と特定の荷重でのたわみを決定するように設計されています。
この方法は、輸送中および適用中の曲げ応力に対する製品の耐性を決定するために使用できます。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 5725-1, 測定方法と結果の正確性 (真実性と精度) — Part 1: 一般原則と定義
- ISO 5725-2, 測定方法と結果の精度 (真度と精度) — Part 2: 標準測定方法の再現性と再現性を決定するための基本的な方法
- ISO 29465, 建築用途の断熱製品 - 長さと幅の決定
- ISO 29466, 建築用途の断熱製品 - 厚さの測定
- ISO 29768, 建物用途の断熱製品 - 試験片の直線寸法の決定
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
曲げ強度
σbb
曲げ手順中に記録された最大力Fmから計算された最大応力
3.2
曲げ応力
σXX
たわみXでの力FXから計算された応力
3.3
偏向
X
負荷エッジで測定された力FXでのスパン中央での試験片の垂直変位
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12344 was prepared by Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 1, Test and measurement methods.
ISO 12344 is based on EN 12089:1997, prepared by Technical Committee CEN/TC 88, Thermal insulating materials and products. However,
- 6.4, Conditioning of the test specimens,
- 7.1, Test conditions, and
- Clause 10, Test report,
have been modified to reflect the conditions for tropical countries.
Introduction
This International Standard is based on EN 12089:1997, prepared by Technical Committee CEN/TC 88, Thermal insulating materials and products, which has been amended by ISO/TC 163/SC 1 with reference to conditioning and test conditions in tropical countries.
This International Standard is one of a series of documents specifying test methods, based on existing European Standards, that are being adopted by ISO. This “package” of standards includes the following group of interrelated documents.
| International Standard | Title | Respective EN standard |
|---|---|---|
| ISO 12344 | Thermal insulating products for building applications — Determination of bending behaviour | EN 12089 |
| ISO 12968 | Thermal insulation products for building applications — Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test) | EN 13495 |
| ISO 29465 | Thermal insulating products for building applications — Determination of length and width | EN 822 |
| ISO 29466 | Thermal insulating products for building applications — Determination of thickness | EN 823 |
| ISO 29467 | Thermal insulating products for building applications — Determination of squareness | EN 824 |
| ISO 29468 | Thermal insulating products for building applications — Determination of flatness | EN 825 |
| ISO 29469 | Thermal insulating products for building applications — Determination of compression behaviour | EN 826 |
| ISO 29470 | Thermal insulating products for building applications — Determination of the apparent density | EN 1602 |
| ISO 29471 | Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity) | EN 1603 |
| ISO 29472 | Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions | EN 1604 |
| ISO 29764 | Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions | EN 1605 |
| ISO 29765 | Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces | EN 1607 |
| ISO 29766 | Thermal insulating products for building applications — Determination of tensile strength parallel to faces | EN 1608 |
| ISO 29767 | Thermal insulating products for building applications — Determination of short-term water absorption by partial immersion | EN 1609 |
| ISO 29768 | Thermal insulating products for building applications — Determination of linear dimensions of test specimens | EN 12085 |
| ISO 29769 | Thermal insulating products for building applications — Determination of behaviour under point load | EN 12430 |
| ISO 29770 | Thermal insulating products for building applications — Determination of thickness for floating-floor insulating products | EN 12431 |
| ISO 29771 | Thermal insulating materials for building applications — Determination of organic content | EN 13820 |
| ISO 29803 | Thermal insulation products for building applications — Determination of the resistance to impact of external thermal insulation composite systems (ETICS) | EN 13497 |
| ISO 29804 | Thermal insulation products for building applications — Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material | EN 13494 |
| ISO 29805 | Thermal insulation products for building applications — Determination of the mechanical properties of glass fibre meshes | EN 13496 |
1 Scope
This International Standard specifies the equipment and procedures for determining the bending behaviour of full-size products (Method A) and test specimens (Method B) under the action of three-point loading. It is applicable to thermal insulating products for building applications.
The test is designed to determine the bending strength of products and their deflection at a given load.
The method can be used to determine the resistance of the product to bending stresses during transport and application.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 5725-1, Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
- ISO 5725-2, Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
- ISO 29465, Thermal insulating products for building applications — Determination of length and width
- ISO 29466, Thermal insulating products for building applications — Determination of thickness
- ISO 29768, Thermal insulating products for building applications — Determination of linear dimensions of test specimens
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
bending strength
σb
maximum stress calculated from the maximum force, Fm, recorded during the bending procedure
3.2
bending stress
σX
stress calculated from the force, FX , at the deflection, X
3.3
deflection
X
vertical displacement of the test specimen at mid-span, at the force FX , measured at the loading edge