※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 12466-1 は、技術委員会 ISO/TC 89, 木材ベースのパネル、小委員会 SC 3, 合板によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 12466-1:1999) を廃止し、置き換えます。
ISO 12466 は、一般タイトル「合板 - 接着品質」の下に、次の部分で構成されています。
- Part 1: テスト方法
- Part 2: 要件
1 スコープ
ISO 12466 のこの部分では、熱硬化性樹脂で接着された合板、ブロックボード、バッテンボード、およびラミンボードの接着品質をせん断試験によって判定する方法が規定されています。
注ISO 12466 のこの部分で定義されている方法と他の方法との相関関係を実証できる場合は、これらを使用することができます。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 12466-2, 合板 — 接着品質 — Part 2: 要件
- ISO 16999, 木質パネル — 試験片のサンプリングと切断
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12466-1 was prepared by Technical Committee ISO/TC 89, Wood-based panels, Subcommittee SC 3, Plywood.
This second edition cancels and replaces the first edition (ISO 12466-1:1999), which has been technically revised.
ISO 12466 consists of the following parts, under the general title Plywood — Bonding quality:
- Part 1: Test methods
- Part 2: Requirements
1 Scope
This part of ISO 12466 specifies methods for determining the bonding quality of plywood, blockboard, battenboard, and laminboard, bonded with thermosetting resin, by shear testing.
NOTE If it is possible to demonstrate a correlation between the methods defined in this part of ISO 12466 and other methods, these may be used.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 12466-2, Plywood — Bonding quality — Part 2: Requirements
- ISO 16999, Wood-based panels — Sampling and cutting of test pieces
Bibliography
| 1 | ISO 2074, Plywood — Vocabulary |
| 2 | ISO 12465, Plywood — Specifications |