※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 12509 は、技術委員会 ISO/TC 127, 土工機械、小委員会 SC 2, 安全要件および人的要因によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 12509:1995) を取り消して置き換えるものです。
序章
土工機械は、さまざまな作業や作業現場で機能するように設計されています。それらのサイズ、質量、速度、組み合わせ、および装備も大きく異なります。したがって、照明、信号灯、標識灯、およびリフレクター装置の組み合わせは異なります。
この国際規格は、機械の用途と速度に基づいて照明、信号灯、標識灯、反射鏡装置を選択するために必要な情報を提供します。
1 スコープ
この国際規格は、土工機械の照明、信号灯および標識灯、反射鏡装置の設置および性能に関する最小要件を規定しています。これは、ISO 6165 で定義されているように、オフロードおよびオンロードでの使用を目的とした自走式ホイールまたはクローラー土工機械に適用できます。歩行者制御の機械には適用されません。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 303:2002, 道路車両 — 自動車およびそのトレーラー用の照明および光信号装置の設置
- ISO 6165, 土工機械 — 基本タイプ — 語彙
- ISO 7227:1987, 道路車両 — 照明および光信号装置 — 語彙
参考文献
| [1] | ISO 6016, 土工機械 — 機械全体、それらの機器およびコンポーネントの質量を測定する方法 |
| [2] | ISO 6746-1, 土工機械 — 寸法およびコードの定義 — Part 1: ベース マシン |
| [3] | ISO 6747, 土工機械 — トラクター・ドーザー — 用語および商用仕様 |
| [4] | ISO 7131, 土工機械 — ローダー — 用語と商用仕様 |
| [5] | ISO 7132, 土工機械 — ダンパー — 用語および商用仕様 |
| [6] | ISO 7133, 土工機械 — トラクター・スクレーパー — 用語と商用仕様 |
| [7] | ISO 7134, 土工機械 - グレーダー - 用語と商業仕様 |
| [8] | ISO 7135, 土工機械 — 油圧ショベル — 用語および商用仕様 |
| [9] | ISO 7136, 土工機械 — パイプ敷設機 — 用語と商用仕様 |
| [10] | CIE S004, 光信号の色1) |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12509 was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee SC 2, Safety requirements and human factors.
This second edition cancels and replaces the first edition (ISO 12509:1995), which has been technically revised.
Introduction
Earth-moving machines are designed to function in a wide variety of operations and worksites. Their size, mass, speed, combinations and equipment also greatly vary. Therefore, the combination of lighting, signalling and marking lights, and reflex-reflector devices will differ.
This International Standard provides information needed for the selection of lighting, signalling and marking lights and reflex-reflector devices based on machine application and speed.
1 Scope
This International Standard specifies the minimum requirements for installation and performance of lighting, signalling and marking lights, and reflex-reflector devices on earth-moving machines. It is applicable to self-propelled wheel or crawler earth-moving machines as defined in ISO 6165, intended for off-road, as well as on-road, use. It is not applicable to pedestrian-controlled machines.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 303:2002, Road vehicles — Installation of lighting and light signalling devices for motor vehicles and their trailers
- ISO 6165, Earth-moving machinery — Basic types — Vocabulary
- ISO 7227:1987, Road vehicles — Lighting and light signalling devices — Vocabulary
Bibliography
| [1] | ISO 6016, Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components |
| [2] | ISO 6746-1, Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine |
| [3] | ISO 6747, Earth-moving machinery — Tractor-dozers — Terminology and commercial specifications |
| [4] | ISO 7131, Earth-moving machinery — Loaders — Terminology and commercial specifications |
| [5] | ISO 7132, Earth-moving machinery — Dumpers — Terminology and commercial specifications |
| [6] | ISO 7133, Earth-moving machinery — Tractor-scrapers — Terminology and commercial specifications |
| [7] | ISO 7134, Earth-moving machinery — Graders — Terminology and commercial specifications |
| [8] | ISO 7135, Earth-moving machinery — Hydraulic excavators — Terminology and commercial specifications |
| [9] | ISO 7136, Earth-moving machinery — Pipelayers — Terminology and commercial specifications |
| [10] | CIE S004, Colours of Light Signals1) |