※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 12510 は、技術委員会 ISO/TC 127, 土工機械、小委員会 SC 3, 運用および保守によって作成されました。
1 スコープ
この国際規格は、ISO 6165 で定義されている土木機械の安全性、効率性、信頼性、メンテナンスと保守作業の容易さを促進する設計機能を組み込むためのガイドラインを確立します。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 6165, 土工機械 — 基本タイプ — 語彙
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
3.1
テストポイント
正しい動作を定期的にチェックするため、または故障を切り分けるために、機械のステータスに関する情報へのアクセスを提供するポイント
3.2
サービスポイント
潤滑、充填、排水、または同様の保守作業のためのアクセスを提供するポイント
参考文献
| 1 | ISO 2860, 土工機械 - 最小アクセス寸法 |
| 2 | ISO 2867, 土工機械 — アクセス システム |
| 3 | ISO 451, 土工機械 — サービスツール — Part 1: 共通のメンテナンスおよび調整ツール |
| 4 | ISO 6012, 土工機械 — サービス計装 |
| 5 | ISO 6302, 土工機械 - プラグの排水、充填、レベル調整 |
| 6 | ISO 6392-1, 土工機械 — 潤滑継手 — Part 1: ニップルのタイプ |
| 7 | ISO 640, 土工機械 - オペレーター制御およびその他の表示用の記号 |
| 8 | ISO 6750:1984, 土工機械 — 操作とメンテナンス — マニュアルの形式と内容 |
| 9 | ISO 8925, 土工機械 - 診断ポート |
| 10 | ISO 9244, 土工機械 - 安全標識と危険図 - 一般原則 |
| 11 | ISO 9247, 土工機械 — 電線およびケーブル — 識別およびマーキングの原則 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12510 was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee SC 3, Operation and maintenance.
1 Scope
This International Standard establishes guidelines for the incorporation of design features that promote safety, efficiency, reliability and ease of maintenance and service operations on earth-moving machinery as defined in ISO 6165.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 6165, Earth-moving machinery — Basic types — Vocabulary
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
test points
points which provide access to information about the status of the machine, either for routine checking of correct operation or for isolating malfunctions
3.2
service points
points which provide access for lubrication, filling, draining or similar servicing operations
Bibliography
| 1 | ISO 2860, Earth-moving machinery — Minimum access dimensions |
| 2 | ISO 2867, Earth-moving machinery — Access systems |
| 3 | ISO 4510 (all parts), Earth-moving machinery — Service tools — Part 1: Common maintenance and adjustment tools |
| 4 | ISO 6012, Earth-moving machinery — Service instrumentation |
| 5 | ISO 6302, Earth-moving machinery — Drain, fill and level plugs |
| 6 | ISO 6392-1, Earth-moving machinery — Lubrication fittings — Part 1: Nipple type |
| 7 | ISO 6405 (all parts), Earth-moving machinery — Symbols for operator controls and other displays |
| 8 | ISO 6750:1984, Earth-moving machinery — Operation and maintenance — Format and content of manuals |
| 9 | ISO 8925, Earth-moving machinery — Diagnostic ports |
| 10 | ISO 9244, Earth-moving machinery — Safety signs and hazard pictorials — General principles |
| 11 | ISO 9247, Earth-moving machinery — Electrical wires and cables — Principles of identification and marking |