※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 12633-2 は、技術委員会 ISO/TC 5, 鉄金属パイプおよび金属付属品、小委員会 SC 1, 鋼管によって作成されました。
ISO 12633-2 のこの初版は、マイナー リビジョンを構成する ISO 657-14:2000 を取り消し、置き換えます。特に、主題分野ごとに複数の文書をより適切にグループ化し、編集上の若干の改善が行われました。
ISO 12633は、「非合金および細粒鋼の熱間仕上げ構造中空セクション」という一般タイトルの下、次の部分で構成されています。
- Part 1: 技術的な納品条件
- Part 2: 寸法と断面特性
1 スコープ
ISO 12633 のこの部分では、熱間仕上げされた円形、正方形、および長方形の構造中空セクションの公差が指定され、さまざまな標準サイズの寸法と断面特性が示されています。
注技術的な提供要件については、ISO 12633-1 を参照してください。
2 基準参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 12633-1, 非合金および細粒鋼の熱間仕上げ構造中空セクション — Part 1: 技術納品条件
3 用語と定義
この文書の目的としては、ISO 12633-1 に記載されている用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12633-2 was prepared by Technical Committee ISO/TC 5, Ferrous metal pipes and metallic fittings, Subcommittee SC 1, Steel tubes.
This first edition of ISO 12633-2 cancels and replaces ISO 657-14:2000, of which it constitutes a minor revision. In particular, better grouping of several documents by subject area and minor editorial improvements have been carried out.
ISO 12633 consists of the following parts, under the general title Hot-finished structural hollow sections of non-alloy and fine grain steels:
- Part 1: Technical delivery conditions
- Part 2: Dimensions and sectional properties
1 Scope
This part of ISO 12633 specifies the tolerances for hot-finished circular, square and rectangular structural hollow sections, and gives the dimensions and sectional properties for a range of standard sizes.
NOTE For the technical delivery requirements, see ISO 12633-1.
2 Normative reference
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 12633-1, Hot-finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 12633-1 apply.