※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 12819 は、時計技術委員会 ISO/TC 114 によって作成されました。
この第 2 版は、技術的に改訂された初版 (ISO 12819:1999) および技術訂正草 ISO 12819:1999/Cor.1:1999 を取り消し、置き換えます。
1 スコープ
この国際規格は、電池式時計の電池寿命を決定するための 2 つの方法を規定し、メーカーまたは販売業者がユーザーに通知するために使用するラベルを規定しています。
入手可能な情報によると、理論上のバッテリー寿命または実際のバッテリー寿命は、この国際規格に記載されている式を使用して計算する必要があります。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 6426-2, 時計学用語 - Part 2: 技術的および商業的定義
- IEC 60086-3, 一次電池 - Part 3: 時計用電池
3 用語と定義
この文書の目的としては、ISO 6426-2 および以下に示されている用語と定義が適用されます。
3.1
バッテリー寿命
電池式時計の動作時間。電池とムーブメントの特性によって決まります。
注記 1:電池の寿命は、電池が挿入されて時計のムーブメントに電力を供給し始めたときに始まり、電圧が動作に必要なレベルを下回って時計が停止する時点まで続きます。
3.2
実用的なバッテリー寿命
AP
保管中および動作中のバッテリーの自己放電電流を考慮したバッテリー寿命の計算
3.3
理論上のバッテリー寿命
で
電流の自己放電がない理想的なバッテリーを想定したバッテリー寿命の計算
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12819 was prepared by Technical Committee ISO/TC 114, Horology.
This second edition cancels and replaces the first edition (ISO 12819:1999) and Technical Corrigendum ISO 12819:1999/Cor.1:1999, which have been technically revised.
1 Scope
This International Standard specifies two methods for determining the battery life of a battery-powered watch and specifies the labelling to be used by the manufacturers or the distributors to inform the users.
According to the available information, either the theoretical battery life or the practical battery life must be calculated using the equations given in this International Standard.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 6426-2, Horological vocabulary — Part 2: Technical and commercial definitions
- IEC 60086-3, Primary batteries — Part 3: Watch batteries
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6426-2 and the following apply.
3.1
battery life
operating duration of a battery-powered watch, as determined by the characteristics of the battery and the movement
Note 1 to entry: The battery life starts when the battery is inserted and starts powering the movement of the watch and lasts until the point when the voltage falls below the level required for operation and the watch stops.
3.2
practical battery life
AP
calculation of the battery life, taking in account the self-discharge current of the battery during storage and operation
3.3
theoretical battery life
AT
calculation of the battery life assuming an ideal battery with no self-discharge of current