※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 3.
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
この国際規格の一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
国際規格 ISO 12844 は、技術委員会 ISO/TC 172, 光学および光学機器、小委員会 SC 3, 光学材料およびコンポーネントによって作成されました。
1 スコープ
この国際規格は、ダイヤモンド ペレットを使用した未加工の光学ガラスの研削性を決定するための試験方法を規定し、この方法によって決定される研削性に従って光学ガラスの分類を定義します。
2 用語と定義
この国際規格の目的のために、次の用語と定義が適用されます。
2.1
研削性
標準参照ガラスから除去された量と比較して、ダイヤモンドペレットツールで一定時間粉砕されたときにガラス試料から除去された量。
参考文献
| [1] | ISO 6508-1:1999, 金属材料 — ロックウェル硬さ試験 — 1: 試験方法 (スケール A, B, C, D, E, F, G, H, K, N, T) |
| [2] | ISO 7438:1985, 金属材料 — 曲げ試験。 |
| [3] | FEPA 規格 43-GB-1984 4) 、溶融アルミナと炭化ケイ素のコーティングされた砥粒。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 12844 was prepared by Technical Committee ISO/TC 172, Optics and optical instruments, Subcommittee SC 3, Optical materials and components.
1 Scope
This International Standard specifies a test method for determining the grindability of raw optical glass with diamond pellets, and defines a classification of optical glasses according to the grindability determined by this method.
2 Terms and definitions
For the purposes of this International Standard, the following term and definition applies.
2.1
grindability
volume removed from a glass specimen when it is ground with a diamond pellet tool for a fixed period of time, relative to that removed from a standard reference glass
Bibliography
| [1] | ISO 6508-1:1999, Metallic materials — Rockwell hardness test — 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) |
| [2] | ISO 7438:1985, Metallic materials — Bend test. |
| [3] | FEPA-Standard 43-GB-1984 4) , Coated abrasive grains of fused alumina and silicon carbide. |