※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、次の資料を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 10, 技術製品文書、小委員会 SC 6, 機械工学文書によって作成されました。
ISO 129 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
1 スコープ
この文書は、主にプレート、バー、およびプロファイルセクションで構成される金属構造物で一般的に使用される図面の寸法を指定します。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 129-1, 技術図面 - 寸法および公差の表示Part 1: 一般原則
- ISO 129-4, 技術製品文書 (TPD) — 寸法および公差の表示 — Part 4: 造船図面の寸法記入
- ISO 5261:1995, 技術図面 - バーとプロファイルセクションの簡略化された表現
- ISO 657-1, 熱間圧延鋼片 — Part 1: 等しい脚角度 — 寸法
- ISO 657-2, 熱間圧延鋼片 — Part 2: 不等脚角度 — 寸法
- ISO 657-16, 熱間圧延鋼片 — Part 16: 傾斜フランジ柱セクション (メートル系列) — 寸法および断面特性
- ISO 657-18, 熱間圧延鋼形材 — Part 18: 造船用 L 形材 (メートル系列) — 寸法、断面特性および許容差
- ISO 657-21, 熱間圧延鋼セクション — Part 21: 深さとフランジ幅が等しい T セクション — 寸法
- ISO 10209, 製品技術文書 — 語彙 — 技術図面、製品定義、および関連文書に関連する用語
3 用語と定義
この文書の目的のために、ISO 10209, ISO 129-1, および以下で与えられる用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
重心線
重心を通る線
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 10, Technical product documentation, Subcommittee SC 6, Mechanical engineering documentation.
A list of all parts in the ISO 129 series can be found on the ISO website.
1 Scope
This document specifies the dimensioning of drawings for general use on structural metal work mainly consisting of plates, bars and profile sections.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 129-1, Technical drawings — Indication of dimensions and tolerances Part 1: General principles
- ISO 129-4, Technical product documentation (TPD) — Indication of dimensions and tolerances — Part 4: Dimensioning of shipbuilding drawings
- ISO 5261:1995, Technical drawings — Simplified representation of bars and profile sections
- ISO 657-1, Hot-rolled steel sections — Part 1: Equal-leg angles — Dimensions
- ISO 657-2, Hot-rolled steel sections — Part 2: Unequal-leg angles — Dimensions
- ISO 657-16, Hot-rolled steel sections — Part 16: Sloping flange column sections (metric series) — Dimensions and sectional properties
- ISO 657-18, Hot-rolled steel sections — Part 18: L sections for shipbuilding (metric series) — Dimensions, sectional properties and tolerances
- ISO 657-21, Hot-rolled steel sections — Part 21: T-sections with equal depth and flange width — Dimensions
- ISO 10209, Technical product documentation — Vocabulary — Terms relating to technical drawings, product definition and related documentation
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 10209, ISO 129-1 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
centroidal line
line passing through the centre of mass