※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 13002 は、技術委員会 ISO/TC 61, プラスチック、小委員会 SC 13, 複合材料および強化繊維によって作成されました。
1 スコープ
1.1この国際規格は、仕様の基礎として使用できる炭素繊維のフィラメント糸の指定システムを確立します。
1.2この指定システムは、ポリマー複合材料の強化に使用されるフィラメント糸に適用されます。
ステープル ヤーン、織物、ブレード、ニット、マットなどの形で熱分解された不連続繊維製品には適用されません。
1.3フィラメント糸の種類は、指定特性の適切なレベルに基づく分類システムによって互いに区別されます。
- a)引張弾性率;
- b)引張強度
- c)線密度。
1.4同じ名称の材料が同じ性能を発揮することを意味するものではありません。この国際規格は、特定の用途および/または処理方法のための材料を指定するために必要となる可能性のある工学データ、性能データ、または処理条件に関するデータを提供していません。
1.5特定の用途向けのフィラメント糸を指定するため、または再現可能な加工を確実にするために、データ ブロック 3 に追加の要件を指定することができます (条項 3 を参照)
2 参考文献
次の規格には規定が含まれており、このテキストで参照することにより、この国際規格の規定を構成します。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 1889:1997, 補強糸 — 線密度の決定。
- ISO 10618: — 1) 、炭素繊維 — 樹脂含浸糸の引張特性の測定。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 13002 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 13, Composites and reinforcement fibres.
1 Scope
1.1 This International Standard establishes a system of designation for filament yarns of carbon fibre which may be used as the basis for specifications.
1.2 This designation system is applicable to filament yarns used for the reinforcement of polymer composites.
It does not apply to discontinuous fibre products pyrolized in the form of staple yarns, woven fabrics, braids, knits, mats, etc.
1.3 The types of filament yarns are differentiated from each other by a classification system based on appropriate levels of the designatory properties:
- a) tensile modulus of elasticity;
- b) tensile strength;
- c) linear density.
1.4 It is not intended to imply that materials having the same designation give the same performance. This International Standard does not provide engineering data, performance data or data on processing conditions which may be required to specify a material for a particular application and/or method of processing.
1.5 In order to specify a filament yarn for a particular application or to ensure reproducible processing, additional requirements may be given in data block 3 (see clause 3).
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 1889:1997, Reinforcement yarns — Determination of linear density.
- ISO 10618:— 1) , Carbon fibre — Determination of tensile properties of resin-impregnated yarns.