ISO 13105-2:2014 建築用機械および設備—コンクリート表面の浮きおよび仕上げ用の機械—パート2：安全要件と検証 | ページ 2

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information

The committee responsible for this document is ISO/TC 195, Building construction machinery and equipment, Subcommittee SC 1, Machinery and equipment for concrete work.

ISO 13105 consists of the following parts, under the general title Building construction machinery and equipment — Machinery for concrete surface floating and finishing:

• Part 1: Terms and commercial specifications
• Part 2: Safety requirements and verification

Introduction

This part of ISO 13105 is a type-C standard as stated in ISO 12100.

This part of ISO 13105 is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety:

• machine manufacturers (small, medium, and large enterprises);
• health and safety bodies (regulators, accident prevention organisations, market surveillance, etc.).

Others can be affected by the level of machinery safety achieved with the means of this part of ISO 13105 by the above-mentioned stakeholder groups:

• machine users/employers (small, medium, and large enterprises);
• machine users/employees (e.g. trade unions, organizations for people with special needs);
• service providers, e.g. for maintenance (small, medium, and large enterprises);
• consumers (in the case of machinery intended for use by consumers).

The above-mentioned stakeholder groups have been given the possibility to participate at the drafting process of this part of ISO 13105.

The machinery concerned and the extent to which hazards, hazardous situations, or hazardous events are covered are indicated in the Scope of this part of ISO 13105.

When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard.

ISO 13105 deals with machinery designed for smoothing and finishing concrete on construction sites. These machines are commonly referred to as “power trowels.”

1 Scope

This part of ISO 13105 specifies safety requirements for machines used for concrete surface floating and finishing. This includes pedestrian-controlled equipment and ride-on equipment.

It is not applicable to

• internal or external vibrators or ancillary equipment used with internal and external vibrators, for example, air compressors, hydraulic power sources, and voltage transformers,
• remote-controlled or hand-held smoothing machines and self-acting (robotic) smoothing machines, and
• strike-off type machines commonly known as screeds.

This part of ISO 13105 deals with significant hazards, hazardous situations, or hazardous events relevant to machinery for concrete surface floating and finishing (power trowels) when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

This part of ISO 13105 is not applicable to machines which are manufactured before the date of its publication.

2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 12100, ISO 13105-1, and the following shall apply.

Bibliography