※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 13266 は、技術委員会 ISO/TC 138, 流体輸送用のプラスチック パイプ、継手およびバルブ、小委員会 SC 1, 土壌、廃棄物および排水用のプラスチック パイプおよび継手 (土地の排水を含む)によって作成されました。
1 スコープ
この国際規格は、検査室の上部アセンブリとマンホール構成部品の表面荷重と交通荷重に対する耐性を試験する方法を指定しています。
カバーとフレームをテストするための要件には適用されません。これらの要件は、材料に応じて、EN 124 またはその他の規格で指定されています。
注アッパー アセンブリ コンポーネントには、通常、ライザー シャフト、テーパー、レジューシング スラブ、テレスコピック ジョイントが含まれます。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 13260, 非圧力地下排水および下水道用の熱可塑性配管システム — 複合温度サイクルおよび外部負荷に対する耐性の試験方法
- EN 124, 車両および歩行者エリアのガリー トップおよびマンホール トップ — 設計要件、型式試験、マーキング、品質管理
- ENV 1046, プラスチック製の配管およびダクト システム — 上下水道の輸送のための建物構造外のシステム — 地上および地下への設置の慣行
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
検査室
排水または下水道設備を接続し、排水または下水道の方向を変更するために使用される排水または下水道フィッティングで、地面レベルで終了し、最小外径 200 mm, 内径 800 mm 未満のライザーシャフトを有する
注記 1:地上レベルでの終端により、清掃、検査、試験装置の導入、およびがれきの除去が可能になりますが、人員のアクセスは提供されません。
3.2
男の穴
排水設備または下水道設備を接続するため、および/または排水設備または下水道の経路を変更するために使用される排水設備または下水設備で、地上レベルで終了し、最小内径 800 mm のライザーシャフトを備えている
注記 1:地上レベルでの終端により、清掃、検査、試験装置の導入、およびがれきの除去が可能になり、人員のアクセスが提供されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13266 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 1, Plastics pipes and fittings for soil, waste and drainage (including land drainage).
1 Scope
This International Standard specifies a method of testing the resistance of the upper assembly of inspection chambers and manhole components against surface and traffic loading.
It is not applicable to requirements for testing the cover and frame. Those requirements are specified in EN 124 or other standards, depending on the material.
NOTE Upper assembly components normally include riser shafts, tapers, reducing slabs and telescopic joints.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 13260, Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading
- EN 124, Gully tops and manhole tops for vehicular and pedestrian areas — Design requirements, type testing, marking, quality control
- ENV 1046, Plastics piping and ducting systems — Systems outside building structures for the conveyance of water or sewage — Practices for installation above and below ground
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
inspection chamber
drainage or sewerage fitting used to connect drainage or sewerage installations and to change the direction of drainage or sewerage runs, which terminates at ground level and has a riser shaft with a minimum outer diameter of 200 mm and an inner diameter of less than 800 mm
Note 1 to entry: The termination at ground level permits the introduction of cleaning, inspection and test equipment and the removal of debris, but does not provide access for personnel.
3.2
manhole
drainage or sewerage fitting used to connect drainage or sewerage installations and/or to change the direction of drainage or sewerage runs, which terminates at ground level and has a riser shaft with a minimum inner diameter of 800 mm
Note 1 to entry: The termination at ground level permits the introduction of cleaning, inspection and test equipment and the removal of debris, and provides access for personnel.