この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自発的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、欧州標準化委員会 (CEN) 技術委員会 CEN/TC 23, 可搬型ガスボンベと協力して、技術委員会 ISO/TC 58, ガスボンベ、小委員会 SC 2, シリンダー継手によって作成されました。 ISO と CEN 間の技術協力 (ウィーン協定)
この第 3 版は、技術的に改訂された第 2 版 (ISO 13338:2017) を取り消して置き換えるものです。主な変更点は次のとおりです。
- ガスおよびガス混合物の腐食性が明らかになりました。
- 腐食性ガスおよびガス混合物に対する FTSC コードの定義は、箇条 4 で明確化されています。
- 表 1 にマイナーな編集上の変更が加えられました。
序章
ISO 5145 は、さまざまな互換性のあるガス グループのさまざまなバルブ アウトレットの寸法を指定します。これらの適合するガス グループは、ISO 14456 で定義された実用的な基準に従って決定されます。
これらの基準は、ガスの特定の物理的、化学的、毒性、腐食性に基づいています。特に、この文書ではガス腐食性が考慮されています。
この文書の目的は、皮膚、目、気道に対するガスの組織腐食性と、腐食性に関連する酸/塩基化学反応の可能性を考慮して、各ガスに分類カテゴリを割り当てることです。
腐食性成分を含むガス混合物については、GHS (Globally Harmonized System of Classification and Labeling of Chemicals) [3]の加算法に基づく計算方法が提案されています。
ただし、腐食性ガス成分を含むガス混合物については、腐食性ガス濃度に関係なく、一部のバルブ出口規格で腐食性カテゴリを使用する必要があります。
1 スコープ
このドキュメントでは、ガスおよびガス混合物の腐食性を判断して、それぞれに適切な出口接続を割り当てることができるようにするために、次のことを指定しています。
- 純粋なガスと一部の液体については、腐食性を示す完全なリスト。
- ガス混合物については、各成分の腐食性に関する実験データがない場合の計算方法。
2 参考文献
このドキュメントには規範的な参照はありません。
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1
組織腐食性
<ガスまたはガス混合物> 生体組織 (目、皮膚、粘膜) を損傷または破壊するガスの能力
注記 1: GHS 危険有害性クラス「皮膚腐食性/刺激性」カテゴリに該当します。 1, 1A, 1B, または 1C, または GHS 有害性クラス「重篤な眼の損傷/眼への刺激」、Cat. 1.
3.2
イライラする
皮膚、目、粘膜に一時的な反応を引き起こす可能性のあるガスの性質
注記 1: GHS 危険有害性クラス「皮膚腐食性/刺激性」、Cat. 2, または GHS 有害性クラス「重篤な眼の損傷/眼刺激性」、Cat. 2.
参考文献
| [1] | ISO 5145, ガス シリンダー — ガスおよびガス混合物用のシリンダー バルブ アウトレット — 選択と寸法 |
| [2] | ISO 14456, ガスボンベ — ガス特性および関連分類 (FTSC) コード |
| [3] | 国連、化学品の分類および表示に関する世界調和システム(GHS., Rev.9, 2021) |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, Subcommittee SC 2, Cylinder fittings, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 23, Transportable gas cylinders, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 13338:2017), which has been technically revised. The main changes are as follows:
- the corrosiveness of gases and gases mixtures has been clarified;
- the definition of FTSC codes for corrosiveness gases and gas mixtures has been clarified in Clause 4;
- minor editorial changes have been made in Table 1.
Introduction
ISO 5145 specifies the dimensions of different valve outlets for different compatible gas groups. These compatible gas groups are determined according to practical criteria defined in ISO 14456.
These criteria are based on certain physical, chemical, toxic and corrosive properties of the gases. In particular, the gas corrosiveness is considered in this document.
The aim of this document is to assign a classification category for each gas that takes into account the tissue corrosiveness of the gas for skin, eyes and the respiratory tract as well as the potential for a corrosiveness related acid/base chemical reaction.
For gas mixtures containing corrosive components, a calculation method based on the additivity method of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)[3] is proposed.
However, for gas mixtures containing corrosive gas components, some valve outlets standards require the use of the corrosive category regardless of the corrosive gas concentration.
1 Scope
This document specifies the following, in order to determine the corrosiveness of gases and gas mixtures so that a suitable outlet connection can be assigned to each of them:
- for pure gases and some liquids, a complete list indicating their corrosiveness;
- for gas mixtures, a calculation method, in the absence of experimental data, relating to the corrosiveness of each of their components.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
tissue corrosiveness
<gases or gas mixtures> ability of a gas to damage or destroy living tissues (eyes, skin and mucous membranes)
Note 1 to entry: It corresponds to GHS hazard class “Skin corrosion/irritation” Cat. 1, 1A, 1B or 1C, or to GHS hazard class “Serious eye damage/eye irritation”, Cat. 1.
3.2
irritant
property of a gas which can cause a temporary reaction to the skin, eyes and mucous membranes
Note 1 to entry: It corresponds to GHS hazard class “Skin corrosion/irritation”, Cat. 2, or to GHS hazard class “Serious eye damage/eye irritation”, Cat. 2.
Bibliography
| [1] | ISO 5145, Gas cylinders — Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning |
| [2] | ISO 14456, Gas cylinders — Gas properties and associated classification (FTSC) codes |
| [3] | United Nations, Globally Harmonized System of Classification and Labelling of Chemicals (GHS., Rev.9, 2021) |