※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 13480 は、技術委員会 ISO/TC 138, 流体の輸送のためのプラスチック パイプ、継手およびバルブ、小委員会 SC 5, プラスチック材料のパイプ、継手およびバルブの一般的な特性およびそれらの付属品 — 試験方法および基本仕様によって作成されました。 .
この国際規格の附属書 A は情報提供のみを目的としています。
1 スコープ
この国際規格は、一定のフープひずみにさらされ、高い圧力で保持された表面活性溶液に浸漬されたノッチ付きパイプリングの亀裂成長速度で表される、ポリエチレンパイプの遅い亀裂成長に対する耐性を決定するための試験方法を指定します温度。
2 参考文献
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 3126:1974, プラスチック パイプ — 寸法の測定。
- ISO 13479:1997, 流体輸送用ポリオレフィン パイプ - 亀裂伝播に対する抵抗の決定 - ノッチ付きパイプの低速亀裂成長の試験方法 (ノッチ テスト)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 13480 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 5, General properties of pipes, fittings and valves of plastic materials and their accessories — Test methods and basic specifications.
Annex A of this International Standard is for information only.
1 Scope
This International Standard specifies a method of test for determining the resistance to slow crack growth of polyethylene pipe expressed in terms of the rate of crack growth in a notched pipe ring subject to a constant hoop strain and immersed in a surface active solution held at an elevated temperature.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 3126:1974, Plastics pipes — Measurement of dimensions.
- ISO 13479:1997, Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes (notch test).