※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 183, 銅、鉛、亜鉛、ニッケルの鉱石および精鉱によって作成されました。
警告このドキュメントの使用には、危険な物質、操作、および機器が含まれる場合があります。適切な健康および安全慣行を確立し、使用前に規制制限の適用可能性を判断することは、この文書のユーザーの責任です。
1 スコープ
この文書は、硫化銅精鉱中の水銀含有量を測定するための酸分解および蒸気発生原子吸光分析法を規定しています。
この文書は、硫化銅濃縮物中の 5 µg/g から 65 µg/g の水銀の質量分率に適用されます。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、テキスト内で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 385, 実験用ガラス器具 — ビュレット
- ISO 648, 実験用ガラス器具 — シングル ボリューム ピペット
- ISO 1042, 実験用ガラス器具 — ワンマークのメスフラスコ
- ISO 3696, 分析ラボ用水 — 仕様および試験方法
- ISO 4787, 実験用ガラス器具 - 容量計 - 容量の試験方法と使用方法
- ISO 9599, 銅、鉛、亜鉛、ニッケルの硫化物精鉱 — 分析サンプルの吸湿性水分含有量の測定 — 重量法
- ISO 12743:2018, 銅、鉛、亜鉛およびニッケル濃縮物 - 金属および水分含有量の測定のためのサンプリング手順
- ISO Guide 35, 参考資料 — 均質性と安定性の特性評価と評価のためのガイダンス
3 用語と定義
このドキュメントには、用語と定義は記載されていません。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| [1] | ISO 8466-2, 水質 — 分析方法の校正と評価、および性能特性の推定 — Part 2: 非線形二次校正関数の校正戦略 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 183, Copper, lead, zinc and nickel ores and concentrates.
WARNING The use of this document can involve hazardous materials, operations and equipment. It is the responsibility of the user of this document to establish appropriate health and safety practices and determine the applicability of regulatory limitations prior to use.
1 Scope
This document specifies an acid digestion and vapour generation atomic absorption spectrometric method for the determination of the mercury content in copper sulfide concentrates.
This document is applicable to mass fraction of mercury between 5 µg/g and 65 µg/g in copper sulfide concentrates.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 385, Laboratory glassware — Burettes
- ISO 648, Laboratory glassware — Single-volume pipettes
- ISO 1042, Laboratory glassware — One-mark volumetric flasks
- ISO 3696, Water for analytical laboratory use — Specification and test methods
- ISO 4787, Laboratory glassware — Volumetric instruments — Methods for testing of capacity and for use
- ISO 9599, Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method
- ISO 12743:2018, Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content
- ISO Guide 35, Reference materials — Guidance for characterization and assessment of homogeneity and stability
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| [1] | ISO 8466-2, Water quality — Calibration and evaluation of analytical methods and estimation of performance characteristics — Part 2: Calibration strategy for non-linear second-order calibration functions |