※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www.iso.org/iso/foreword.html を参照してください。
この文書は、技術委員会 ISO/TC 89, 木材ベースのパネル、小委員会 SC 3, 合板によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 13609:2014) を廃止し、置き換えます。
前版との主な変更点は以下の通りです。
- ISO 2426-4への参照を含める。
- ISO/IEC Guide 65:1996 への参照を削除。
1 スコープ
この文書は、乾燥、熱帯の乾燥/湿潤、および高湿/屋外条件における一般的な使用のためのブロックボードおよびバッテンボードの仕様の要件を確立します。これには、材料、レイアップ、物理的および機械的特性、接着品質、ホルムアルデヒド放出量、適合性検証、およびマーキングの要件が含まれます。
本資料に記載した数値は製品特性に関するものであり、設計計算に使用する特性値ではありません。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1954, 合板 — 寸法の公差
- ISO 2074, 合板 — 語彙
- ISO 2426-2:2020, 合板 — 表面外観による分類 — Part 2: 広葉樹
- ISO 2426-3:2000, 合板 — 表面外観による分類 — Part 3: 針葉樹
- ISO 2426-4:2018, 合板 — 表面外観による分類 — Part 4: ヤシ合板
- ISO 9426, 木質パネル — パネルの寸法の決定
- ISO 12460-1, 木質パネル — ホルムアルデヒド放出量の測定 — Part 1: 1 立方メートルのチャンバー法によるホルムアルデヒド放出量
- ISO 12460-3, 木質パネル — ホルムアルデヒド放出量の測定 — Part 3: ガス分析方法
- ISO 12460-4, 木質パネル — ホルムアルデヒド放出量の測定 — Part 4: デシケーター法
- ISO 12465:2007, 合板 — 仕様
- ISO 12466-1, 合板 — 接着品質 — Part 1: 試験方法
- ISO 12466-2, 合板 — 接着品質 — Part 2: 要件
- ISO 16978, 木質パネル — 曲げ弾性率および曲げ強度の決定
- ISO 16979, 木質パネル — 含水量の測定
- ISO 16999, 木質パネル — 試験片のサンプリングと切断
- ISO 18775, ベニヤ - 用語と定義、物理的特性と公差の決定
3 用語と定義
この文書の目的上、ISO 2074, ISO 12465, ISO 18775 および以下の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
コアストリップ
長方形の断面を持つ個々の木材を組み立てて固体コアを形成するもの
参考文献
| 1 | ISO/IEC 17065, 適合性評価 — 製品、プロセス、およびサービスを認証する機関の要件 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 89, Wood-based panels, Subcommittee SC 3, Plywood.
This second edition cancels and replaces the first edition (ISO 13609:2014), which has been technically revised.
The main changes compared to the previous edition are as follows:
- inclusion of a reference to ISO 2426-4;
- deleted reference to ISO/IEC Guide 65:1996.
1 Scope
This document establishes requirements for the specifications of blockboards and battenboards for general use, in dry, tropic dry/humid, and high-humid/exterior conditions. It includes requirements of materials, lay-up, physical and mechanical properties, bonding quality, formaldehyde release, conformity verification, and marking.
The values listed in this document relate to product properties, but they are not characteristic values to be used in design calculations.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1954, Plywood — Tolerances on dimensions
- ISO 2074, Plywood — Vocabulary
- ISO 2426-2:2020, Plywood — Classification by surface appearance — Part 2: Hardwood
- ISO 2426-3:2000, Plywood — Classification by surface appearance — Part 3: Softwood
- ISO 2426-4:2018, Plywood — Classification by surface appearance — Part 4: Palm-plywood
- ISO 9426, Wood-based panels — Determination of dimensions of panels
- ISO 12460-1, Wood-based panels — Determination of formaldehyde release — Part 1: Formaldehyde emission by the 1-cubic-metre chamber method
- ISO 12460-3, Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method
- ISO 12460-4, Wood-based panels — Determination of formaldehyde release — Part 4: Desiccator method
- ISO 12465:2007, Plywood — Specifications
- ISO 12466-1, Plywood — Bonding quality — Part 1: Test methods
- ISO 12466-2, Plywood — Bonding quality — Part 2: Requirements
- ISO 16978, Wood-based panels — Determination of modulus of elasticity in bending and of bending strength
- ISO 16979, Wood-based panels — Determination of moisture content
- ISO 16999, Wood-based panels — Sampling and cutting of test pieces
- ISO 18775, Veneers — Terms and definitions, determination of physical characteristics and tolerances
3 Terms and definitions
For the purposes of this document, the terms and definitions in ISO 2074, ISO 12465, and ISO 18775 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
core strip
individual wood pieces with rectangular cross section which are assembled to form the solid core
Bibliography
| 1 | ISO/IEC 17065, Conformity assessment — Requirements for bodies certifying products, processes and services |