この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って起草されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 13697 は、技術委員会 ISO/TC 172, 光学およびフォトニクス、小委員会 SC 9, 電気光学システムによって作成されました。
序章
レーザーベースの光学システムには、反射率や透過特性が大幅に向上した光学部品が必要です。これらの特性を正確に測定できることが必要です。この国際規格の測定手順は、光学部品の鏡面反射率と透過率を広範囲の値で高い精度で測定できるように最適化されています。
1 スコープ
この国際規格は、光学レーザー コンポーネントの鏡面反射率と正透過率を正確に測定するための測定手順を規定しています。記載されている試験方法の精度は、ISO 15368 で概説されている測定手順の精度を数桁上回っています。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 31-6, 数量および単位 — Part 6: 光および関連する電磁放射
- ISO 11145, 光学およびフォトニクス — レーザーおよびレーザー関連機器 — 語彙および記号
- ISO 14644-1, クリーンルームおよび関連する管理された環境 — Part 1: 空気清浄度の分類
3 用語と定義
このドキュメントの目的のために、ISO 11145 および ISO 31-6 に記載されている用語と定義が適用されます。
参考文献
| [1] | ISO 15368:2001, 光学および光学機器 — 平面の反射率および平面平行要素の透過率の測定 |
| [2] | V oss 、A.、P lass 、W.、 Giesen 、A.、 App Opt .、 33 、1994年、p. 8370 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13697 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee SC 9, Electro-optical systems.
Introduction
Laser-based optical systems require optical components with greatly enhanced reflectance and/or transmission characteristics. It is necessary to be able to measure these characteristics precisely. The measurement procedures in this International Standard have been optimized to allow the measurement of the specular reflectance and transmittance of the optical components to a high degree of accuracy over a wide range of values.
1 Scope
This International Standard specifies measurement procedures for the precise determination of the specular reflectance and regular transmittance of optical laser components. The accuracy of the described test methods exceeds that of measurement procedures outlined in ISO 15368 by several orders of magnitude.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 31-6, Quantities and units — Part 6: Light and related electromagnetic radiations
- ISO 11145, Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols
- ISO 14644-1, Cleanrooms and associated controlled environments — Part 1: Classification of air cleanliness
3 Terms and definitions
For the purpose of this document, the terms and definitions given in ISO 11145 and ISO 31-6 apply.
Bibliography
| [1] | ISO 15368:2001, Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements |
| [2] | Voss, A., Plass, W., Giesen, A., Appl. Opt., 33 , 1994, p. 8370 |