この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質に関する説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 138, 流体輸送用のプラスチック パイプ、継手およびバルブ、小委員会 SC 5, プラスチック材料のパイプ、継手およびバルブの一般的特性およびそれらの付属品 — 試験方法および基本仕様によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 13761:1996) を取り消して置き換えるものです。
序章
このドキュメントでは、50 °C までの温度範囲の上昇に対する圧力低減係数と、より高い温度に対処するためのガイダンスを提供します。これらの要因を使用すると、ポリエチレン (PE) パイプライン システムの動作圧力を高温で使用するために決定できます。
1 スコープ
このドキュメントでは、使用される材料の分類に応じて、20 °C から 40 °C または 50 °C の間の温度でポリエチレン (PE) パイプライン システムを操作するための許容操作圧力を取得するための減圧係数の導出方法を指定します。製造用。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 9080:2012, プラスチック配管およびダクトシステム - 外挿によるパイプ形状の熱可塑性材料の長期静水圧強度の決定
3 用語と定義
このドキュメントには、用語と定義は記載されていません。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| 1 | ISO 13760, Plastics pipes for the transport of fluids under pressure — Miner's rule — 累積損傷の計算方法 |
| 2 | ISO 15494, 産業用プラスチック配管システム — ポリブテン (PB)、ポリエチレン (PE)、耐熱性ポリエチレン (PE-RT)、架橋ポリエチレン (PE-X)、ポリプロピレン (PP) — コンポーネントの仕様のメートル系列とシステム |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 138, Plastic pipes, fittings and valves for the transport of fluids, Subcommittee SC 5, General properties of pipes, fittings and valves of plastic materials and their accessories — Test methods and basic specifications.
This second edition cancels and replaces the first edition (ISO 13761:1996), which has been technically revised.
Introduction
This document provides pressure reduction factors for an increased temperature range up to 50 °C and guidance for dealing with higher temperatures. The use of these factors allows the operating pressure of polyethylene (PE) pipeline systems to be determined for use at higher temperatures.
1 Scope
This document specifies a method for the derivation of pressure reduction factors to obtain the allowable operating pressure for operation of polyethylene (PE) pipeline systems at temperatures between 20 °C and 40 °C or 50 °C, dependent on the classification of the material used for manufacture.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 9080:2012, Plastic piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| 1 | ISO 13760, Plastics pipes for the conveyance of fluids under pressure — Miner's rule — Calculation method for cumulative damage |
| 2 | ISO 15494, Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system |