この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 3 に規定されている規則に従って起草されています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 13805 は、技術委員会 ISO/TC 107, 金属およびその他の無機コーティングによって作成されました。
序章
磁器エナメル加工されたアルミニウムのスポーリングは、磁器エナメルがアルミニウム基材から分離することを特徴とする欠陥であり、接着不良によって引き起こされます。したがって、スポール試験は、エナメル配合、エナメル加工前の母材の準備、塗布および焼成手順、エナメル加工用に選択されたアルミニウム合金を含むエナメル加工プロセスの品質を制御することができます。
1 スコープ
この国際規格は、アルミニウムおよびアルミニウム合金上の磁器エナメルコーティングの、湿気または風化への暴露の結果としてのスポーリングに対する耐性を加速測定するための試験方法を指定しています。スポーリングはコーティングとベース メタル間の接着不足によって引き起こされるため、スポール テストは接着のテストです。この試験での剥離の程度が大きければ大きいほど、使用中に物品が剥離する可能性が高くなります。
2 参考文献
次の規範文書には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。日付の記載された参考資料については、これらの刊行物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
3 用語と定義
この国際規格の目的のために、ISO 10141 に示されている用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 13805 was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings.
Introduction
The spalling of porcelain enamelled aluminium, a defect characterized by separation of the porcelain enamel from the aluminium base material, is caused by poor adhesion. The spall test is therefore capable of controlling the quality of the enamelling process including the enamel formulation, the preparation of the base metal prior to enamelling, the application and firing procedures, and the aluminium alloy selected for enamelling.
1 Scope
This International Standard specifies a test method for the accelerated determination of the resistance of porcelain enamel coatings on aluminium and aluminium alloys to spalling as a result of exposure to moisture or weathering. Because spalling is caused by the lack of adhesion between the coating and the base metal, the spall test is a test of adhesion. The greater the extent of spalling in this test, the greater the likelihood that the article will spall in service.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative document indicated below. For undated references, the latest edition of normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 3819, Laboratory glassware — Beakers.
- ISO 4788, Laboratory glassware — Graduated measuring cylinders.
- ISO 10141, Vitreous and porcelain enamels — Vocabulary.
- ISO 13805, Vitreous and porcelain enamels on aluminium — Production of specimens for testing.
3 Terms and definitions
For the purposes of this International Standard, the terms and definitions given in ISO 10141 apply.