※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
適合性評価に関連する ISO 固有の用語や表現の意味の説明、および貿易の技術的障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください。 序文 - 補足情報
この文書を担当する委員会は、ISO/TC 138, 流体輸送用のプラスチックパイプ、継手およびバルブ、小委員会 SC 5, プラスチック材料のパイプ、継手およびバルブおよびその付属品の一般特性 - 試験方法および基本仕様です。
この第 2 版は、技術的に改訂された第 1 版 (ISO 13845:2000) を廃止し、置き換えます。変更の理由は、他のプラスチック材料、他のサイズ、および/または他の試験条件への適用性と、試験方法に関する他の国際規格のテキストとの整合性のためです。
変更点は次のとおりです。
- 材料については言及されていない。
- テストパラメータは省略されていますが、元のテストパラメータは付録 A にあります。
- 編集上の変更が導入されました。
警告この国際規格を使用する人は、該当する場合、通常の実験室の業務に精通している必要があります。この国際規格の使用には、危険な物質、作業、および機器が含まれる場合があります。この国際規格は、その使用に関連する安全上の懸念がある場合、そのすべてに対処することを目的とするものではありません。適切な安全衛生慣行を確立し、使用前に規制上の制限の適用性を判断することは、この国際規格の使用者の責任です。
1 スコープ
この国際規格は、プラスチックまたは金属で作られたエラストマーシールリングタイプのソケットとプラスチック製の圧力パイプの間で組み立てられたジョイントの角度のたわみを使用して、内圧下での気密性をテストする方法を指定しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 5, General properties of pipes, fittings and valves of plastic materials and their accessories — Test methods and basic specifications.
This second edition cancels and replaces the first edition (ISO 13845:2000) which has been technically revised. The reason for modification is for applicability to other plastics materials, other sizes, and/or other test conditions and alignment with texts of other International Standards on test methods.
The modifications are the following:
- no material is mentioned;
- test parameters are omitted, although the original test parameters can be found in Annex A;
- editorial changes have been introduced.
WARNING Persons using this International Standard should be familiar with normal laboratory practice, if applicable. The use of this International Standard may involve hazardous materials, operations, and equipment. This International Standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1 Scope
This International Standard specifies a method for testing the leak tightness under internal pressure with angular deflection of assembled joints between elastomeric-sealing-ring-type sockets made of plastic or metal and plastic pressure pipes.