※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
適合性評価に関連する ISO 固有の用語や表現の意味の説明、および貿易の技術的障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください。 序文 — 補足情報 。
この文書を担当する委員会は、ISO/TC 27, 固体鉱物燃料、小委員会 SC 4, サンプリングです。
この第 2 版は、技術的に改訂された第 1 版 (ISO 13909‑5:2001) を廃止し、置き換えます。
ISO 13909 は、一般タイトル「硬炭およびコークス - 機械的サンプリング」の下に、次の部分で構成されています。
- Part 1: 概要
- Part 2: 石炭 — 流れる川からのサンプリング
- Part 3: 石炭 — 固定ロットからのサンプリング
- Part 4: 石炭 — 試験サンプルの準備
- Part 5: コークス — 移動する川からのサンプリング
- Part 6: コークス — 試験サンプルの調製
- Part 7: サンプリング、サンプルの準備、およびテストの精度を決定する方法
- Part 8: バイアスをテストする方法
1 スコープ
ISO 13909 のこの部分では、移動する流れからのコークスの機械的サンプリングのためのサンプリング計画の設計と確立のための手順と要件、および使用されるサンプリング方法が規定されています。
サンプリング用の機器の種類や機械的サンプリングの実行条件が多様であるため、あらゆる状況に適用できるサンプラーの標準設計を指定することは不適切です。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 13909-1:2016, 硬炭およびコークス - 機械的サンプリング - Part 1: 概要
- ISO 13909-6, 硬炭およびコークス — 機械的サンプリング — Part 6: コークス — 試験サンプルの調製
- ISO 13909-7, 硬炭およびコークス — 機械的サンプリング — Part 7: サンプリング、サンプルの準備および試験の精度を決定する方法
- ISO 13909-8, 硬炭およびコークス — 機械的サンプリング — Part 8: バイアスの試験方法
- ISO 21398, 硬炭およびコークス — 機械式サンプリング システムの検査に関するガイダンス
3 用語と定義
ISO 13909 のこの部分の目的には、ISO 13909-1 に示されている用語と定義が適用されます。
参考文献
| 1 | GY PM, Sampling of Heterogeneous and Dynamic Materials Systems, Elsevier Scientific Publishing, アムステルダム。 1992年 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT), see the following URL: Foreword — Supplementary information .
The committee responsible for this document is ISO/TC 27, Solid mineral fuels, Subcommittee SC 4, Sampling.
This second edition cancels and replaces the first edition (ISO 13909‑5:2001), which has been technically revised.
ISO 13909 consists of the following parts, under the general title Hard coal and coke — Mechanical sampling:
- Part 1: General introduction
- Part 2: Coal — Sampling from moving streams
- Part 3: Coal — Sampling from stationary lots
- Part 4: Coal — Preparation of test samples
- Part 5: Coke — Sampling from moving streams
- Part 6: Coke — Preparation of test samples
- Part 7: Methods for determining the precision of sampling, sample preparation and testing
- Part 8: Methods of testing for bias
1 Scope
This part of ISO 13909 specifies procedures and requirements for the design and establishment of sampling schemes for the mechanical sampling of coke from moving streams and the methods of sampling used.
The diversity of types of equipment for sampling and the conditions under which mechanical sampling is performed make it inappropriate to specify standard designs for samplers which will be applicable to all situations.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 13909-1:2016, Hard coal and coke — Mechanical sampling — Part 1: General introduction
- ISO 13909-6, Hard coal and coke — Mechanical sampling — Part 6: Coke — Preparation of test samples
- ISO 13909-7, Hard coal and coke — Mechanical sampling — Part 7: Methods for determining the precision of sampling, sample preparation and testing
- ISO 13909-8, Hard coal and coke — Mechanical sampling — Part 8: Methods of testing for bias
- ISO 21398, Hard coal and coke — Guidance to the inspection of mechanical sampling systems
3 Terms and definitions
For the purposes of this part of ISO 13909, the terms and definitions given in ISO 13909-1 apply.
Bibliography
| 1 | GY P.M., Sampling of Heterogeneous and Dynamic Material Systems, Elsevier Scientific Publishing, Amsterdam. 1992 |