この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 14145-2 は、技術委員会 ISO/TC 10, 技術図面、製品定義および関連文書、小委員会 SC 9, 図面および関連文書の媒体および機器によって作成されました。
ISO 14145 は、ローラー ボール ペンとリフィルという一般的なタイトルの下に、次の部分で構成されています。
- Part 1: 一般的な使用
- Part 2: ドキュメンタリーの使用 (DOC)
序章
ISO 14145 のこの部分は、ドキュメンタリー用のローラー ボール ペンに適用されます。 ISO 14145 のPart 1 は、一般的なローラー ボール ペンに適用されます。
ドキュメンタリー用には、一般用に加えていくつかの要件が必要です。
- a)文字の読みやすさを確保するため、および
- b)長期間にわたる文書の取り扱いと保管 (これらの要件は、アーキビストとよく話し合われます)
資料利用の例としては、証拠として必要な書類の作成が挙げられます。
さらに、記録用途の要件を満たすペンは、一般用途のペンよりも修正 (たとえば、文書の改ざんの試み) に対して耐性のある線を生成します。
1 スコープ
ISO 14145 のこの部分は、ローラー ボール ペン (詰め替え可能または詰め替え不可) および記録用の詰め替え用の最低品質要件を確立します。
一般的なローラーボールペンの基本的な要件は、ISO 14145-1 に記載されています。
2 参考文献
以下の規格には規定が含まれており、このテキストで参照することにより、ISO 14145 のこの部分の規定を構成します。発行の時点で、示された版は有効でした。すべての規格は改訂される可能性があり、ISO 14145 のこの部分に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 105-A02:1993, テキスタイル — 色堅牢度のテスト — Part A02: 色の変化を評価するためのグレー スケール。
- ISO 105-B02:1994, テキスタイル — 染色堅牢度のテスト — Part B02: 人工光に対する染色堅牢度: キセノン アーク フェージング ランプ テスト。
- ISO 12756:1998, 描画および筆記用具 — ボールペンおよびローラーボールペン — 語彙。
- ISO 14145-1:1998, ローラー ボール ペンおよびリフィル — Part 1: 一般的な使用。
3 つの定義
ISO 14145 のこの部分の目的のために、ISO 12756 で与えられた定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and nongovernmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 14145-2 was prepared by Technical Committee ISO/TC 10, Technical drawings, product definition and related documentation, Subcommittee SC 9, Media and equipment for drawing andrelated documentation.
ISO 14145 consists of the following parts, under the general title Roller ball pens and refills:
- Part 1: General use
- Part 2: Documentary use (DOC)
Introduction
This part of ISO 14145 is applicable to roller ball pens for documentary use. Part 1 of ISO 14145 is applicable to roller ball pens for general use.
For documentary use, some requirements, in addition to those for general use, are necessary
- a) to assure the legibility of lettering, and
- b) for the handling and storage of documents during long periods of time (these requirements are often discussed with the archivist).
An example of documentary use is the preparation of documents that are required as evidence.
Furthermore, pens which meet the requirements for documentary use produce lines which are more resistant to modification (e.g. attempts to falsify a document) than those for general use.
1 Scope
This part of ISO 14145 establishes minimum quality requirements for roller ball pens (refillable or non-refillable) and refills for documentary use.
Basic requirements for roller ball pens for general use are given in ISO 14145-1.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 14145. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 14145 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 105-A02:1993, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour.
- ISO 105-B02:1994, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test.
- ISO 12756:1998, Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary.
- ISO 14145-1:1998, Roller ball pens and refills — Part 1: General use.
3 Definitions
For the purposes of this part of ISO 14145, the definitions given in ISO 12756 apply.