※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 14191 は、技術委員会 ISO/TC 20, 航空機および宇宙船、小委員会 SC 15, 機体ベアリングによって作成されました。
1 スコープ
この国際規格は、機体用途で使用される ISO 15 に準拠した直径系列 3 および 4 のメートル系単列自動調心自動調心ころ軸受の特性、境界寸法、公差、内部すきま、および許容荷重を規定しています。これらのベアリングは、負荷がかかった状態での低速回転と振動のみに耐えるように設計されており、航空機構造の固定部分と可動部分とそれらの制御面の間で使用することを目的としています。
この国際規格の対象となる機体のころ軸受は、− 54 °C から + 150 °C の温度範囲で動作するように設計されています。
2 参考文献
次の規格には規定が含まれており、このテキストで参照することにより、この国際規格の規定を構成します。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 15:1998, 転がり軸受 — ラジアル軸受 — 境界寸法、一般計画。
- ISO 683-17: — 1) 、熱処理鋼、合金鋼および快削鋼 — Part 17: ボールおよびローラー ベアリング鋼。
- ISO 1132:1980, 転がり軸受 - 公差 - 定義。
- ISO 2082:1986, 金属コーティング — 鉄または鋼にカドミウムを電気めっきしたコーティング。
- ISO 4520:1981, 電気めっき亜鉛およびカドミウム コーティング上のクロメート化成コーティング。
- ISO 5593:1997, 転がり軸受 — 語彙。
- ISO 8075:1985, 航空宇宙 — 硬化可能なステンレス鋼部品の表面処理。
- ISO 14190:1998, 航空宇宙 — 機体の転がり軸受: ボールおよび球面ころ軸受 — 技術仕様。
- AMS 2417E: 1993年、メッキ、亜鉛ニッケル合金。2)
3 つの定義
この国際規格の目的のために、ISO 5593 で与えられた定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 14191 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 15, Airframe bearings.
1 Scope
This International Standard specifies the characteristics, boundary dimensions, tolerances, internal clearances and permissible loads of metric series single-row, self-aligning spherical roller bearings of diameter series 3 and 4, in accordance with ISO 15, used in airframe applications. These bearings are designed to withstand only slow rotations and oscillations under load and are intended for use between fixed and moving parts of an aircraft structure and their control surfaces.
The airframe roller bearings covered by this International Standard are designed to operate in the temperature range of − 54 °C to + 150 °C.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 15:1998, Rolling bearings — Radial bearings — Boundary dimensions, general plan.
- ISO 683-17:— 1) , Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels.
- ISO 1132:1980, Rolling bearings — Tolerances — Definitions.
- ISO 2082:1986, Metallic coatings — Electroplated coatings of cadmium on iron or steel.
- ISO 4520:1981, Chromate conversion coatings on electroplated zinc and cadmium coatings.
- ISO 5593:1997, Rolling bearings — Vocabulary.
- ISO 8075:1985, Aerospace — Surface treatment of hardenable stainless steel parts.
- ISO 14190:1998, Aerospace — Airframe rolling bearings: ball and spherical roller bearings — Technical specification.
- AMS 2417E: 1993, Plating, zinc-nickel alloy.2)
3 Definitions
For the purposes of this International Standard, the definitions given in ISO 5593 apply.