※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、次の情報を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書を担当する委員会は、ISO/TC 190, 土壌品質、小委員会 SC 3, 化学的方法および土壌特性です。
この第 2 版は、技術的に改訂された第 1 版 (ISO 14254:2001) を廃止し、置き換えます。
警告この文書を使用する人は、通常の実験室での実践に精通している必要があります。この文書は、その使用に関連する安全上の問題がある場合、そのすべてに対処することを目的とするものではありません。適切な安全衛生慣行を確立し、国の規制条件を確実に遵守することはユーザーの責任です。
重要この文書に従って実施されるテストは、適切な資格を持つスタッフによって実行されることが絶対に重要です。
1 スコープ
この文書は、ISO 11260 に従って取得された土壌サンプルの塩化バリウム抽出物の交換酸性度を決定する方法を指定します。
ここで説明する手順は主に、固定 pH 終点滴定による総交換酸性度の決定に関するものです。
2 つの追加のオプションの手順が示されており、それぞれ抽出物中の遊離 H +酸性度およびアルミニウムの測定について説明します。
この文書は、あらゆる種類の自然乾燥土壌サンプルに適用されます。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
この文書には用語や定義は記載されていません。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
The committee responsible for this document is ISO/TC 190, Soil quality, Subcommittee SC 3, Chemical methods and soil characteristics.
This second edition cancels and replaces the first edition (ISO 14254:2001), which has been technically revised.
WARNING Persons using this document should be familiar with normal laboratory practice. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.
IMPORTANT It is absolutely essential that tests, conducted in accordance with this document, be carried out by suitably qualified staff.
1 Scope
This document specifies a method for the determination of exchangeable acidity in barium chloride extracts of soil samples obtained according to ISO 11260.
The procedure described herein mainly concerns the determination of total exchangeable acidity by means of a fixed pH end point titration.
Two additional and optional procedures are given, describing respectively, determinations of free H+ acidity and aluminium in the extracts.
This document is applicable to all types of air dry soil samples.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 11260, Soil quality — Determination of effective cation exchange capacity and base saturation level using barium chloride solution
- ISO 11464, Soil quality — Pretreatment of samples for physico-chemical analysis
- ISO 11465, Soil quality — Determination of dry matter and water content on a mass basis — Gravimetric method
- ISO 22036, Soil quality — Determination of trace elements in extracts of soil by inductively coupled plasma — Atomic emission spectrometry (ICP-AES)
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses: