※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令、 Part 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語と表現の意味に関する説明、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次の URL を参照してください: www.iso .org/iso/foreword.html .
この文書を担当する委員会は、ISO/TC 21, Equipment for fire protection andfirefighting, 小委員会 SC 8, ガス媒体およびガスを使用する消火システムです。
この第 3 版は、次の変更で技術的に改訂された第 2 版 (ISO 14520-11:2005) を取り消し、置き換えます。
- 表 5, 最小設計データは前版から修正されました。エタノールとメタノールの値以外はすべて正しくありませんでした。
- 条項 7 を追加。
ISO 14520 シリーズのすべての部品のリストは、ISO Web サイトで見つけることができます。
1 スコープ
この文書には、HFC 236fa 消火剤に関するガス消火システムの特定の要件が含まれています。これには、物理的特性、仕様、使用法、および安全面の詳細が含まれます。
このドキュメントは、公称圧力 25 bar および 42 bar で窒素で過圧されたシステムを対象としています。これは、他のシステムの使用を妨げるものではありません。
2 参考文献
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 14520-1:2015, ガス消火システム — 物理的特性およびシステム設計 — Part 1: 一般要件.
3 用語と定義
このドキュメントの目的のために、ISO 14520-1 に記載されている用語と定義が適用されます。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
The committee responsible for this document is ISO/TC 21, Equipment for fire protection and fire fighting, Subcommittee SC 8, Gaseous media and fire fighting systems using gas.
This third edition cancels and replaces the second edition (ISO 14520-11:2005), which has been technically revised with the following changes:
- Table 5, minimum design data was corrected from previous edition; all but values for ethanol and methanol were incorrect;
- added Clause 7.
A list of all parts in the ISO 14520 series can be found on the ISO website.
1 Scope
This document contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 236fa extinguishant. It includes details of physical properties, specification, usage and safety aspects.
This document covers systems operating at nominal pressures of 25 bar and 42 bar superpressurized with nitrogen. This does not preclude the use of other systems.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 14520-1:2015, Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements.
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 14520-1 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses: