※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令、 Part 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました。 www.iso.org/directives
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受け取った特許宣言の ISO リストに記載されます。 www.iso.org/patents
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
この文書を担当する委員会は、ISO/TC 2, Fasteners , Subcommittee SC 11, Fasteners with metric external threadです。
1 スコープ
この国際規格は、製品等級 A のヘクサロビュラ穴付き皿頭ねじの特性を規定し、ねじ山は M2 から M10 までであり、表 3 に従って荷重を減らします。
特別な場合に、この国際規格に記載されている以外の仕様が必要な場合は、既存の国際規格、たとえば ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506-1, および ISO から選択できます。 4759-
注記ISO 14582 では、プロパティ クラス 4.8, 8.8, および 10.9 のスチール製皿頭ネジ、高頭ネジが指定されていますが、頭の高さが異なるため、これらの製品は互換性がありません。
2 参考文献
以下のドキュメントの全体または一部は、このドキュメントで規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 225, ファスナー — ボルト、ネジ、スタッド、ナット — 記号と寸法の説明
- ISO 261, ISO 汎用メートルねじ — 一般計画
- ISO 898-1, 炭素鋼および合金鋼で作られたファスナーの機械的特性 — Part 1: 指定された特性クラスを持つボルト、ネジ、およびスタッド — 並目ねじおよび細目ねじ
- ISO 965-2, ISO 汎用メートルねじ — 公差 — Part 2: 汎用おねじおよびめねじのサイズの制限 — 中品質
- ISO 3269, ファスナー — 受け入れ検査
- ISO 3506-1, 耐腐食性ステンレス鋼ファスナーの機械的特性 — Part 1: ボルト、ねじ、およびスタッド
- ISO 4042, ファスナー — 電気メッキコーティング
- ISO 4759-1, ファスナーの公差 — Part 1: ボルト、ネジ、スタッド、およびナット — 製品グレード A, B, および C
- ISO 6157-1, Fasteners — Surface discontinuities — Part 1: 一般要件のボルト、ネジ、およびスタッド
- ISO 7721, 皿頭ネジ — 頭の構成とゲージ
- ISO 8992, Fasteners — ボルト、ネジ、スタッド、およびナットの一般要件
- ISO 10664, ボルトおよびねじ用のヘクサロビュラ内部駆動機能
- ISO 10683, ファスナー - 無電解亜鉛フレークコーティング
- ISO 10684, ファスナー — 溶融亜鉛めっきコーティング
- ISO 16048, 耐腐食性ステンレス鋼ファスナーのパッシベーション
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
The committee responsible for this document is ISO/TC 2, Fasteners, Subcommittee SC 11, Fasteners with metric external thread.
1 Scope
This International Standard specifies the characteristics of hexalobular socket countersunk flat head screws in product grade A and with threads from M2 to M10 inclusive and with reduced loadability according to Table 3.
If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506-1 and ISO 4759-1.
NOTE Countersunk head screws, high head, made of steel, with property classes 4.8, 8.8 and 10.9, are specified in ISO 14582, but these products are not interchangeable, because of different head heights.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 225, Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions
- ISO 261, ISO general purpose metric screw threads — General plan
- ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
- ISO 965-2, ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
- ISO 3269, Fasteners — Acceptance inspection
- ISO 3506-1, Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs
- ISO 4042, Fasteners — Electroplated coatings
- ISO 4759-1, Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
- ISO 6157-1, Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
- ISO 7721, Countersunk head screws — Head configuration and gauging
- ISO 8992, Fasteners — General requirements for bolts, screws, studs and nuts
- ISO 10664, Hexalobular internal driving feature for bolts and screws
- ISO 10683, Fasteners — Non-electrolytically applied zinc flake coatings
- ISO 10684, Fasteners — Hot dip galvanized coatings
- ISO 16048, Passivation of corrosion-resistant stainless-steel fasteners
Bibliography
| [1] | ISO 888, Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths |
| [2] | ISO 14582, Hexalobular socket countersunk head screws, high head |