※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語と表現の意味に関する説明、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次の URL を参照してください: www.iso .org/iso/foreword.html .
この文書を担当する委員会は、ISO/TC 206, ファイン セラミックスです。
この第 3 版は、技術的に改訂された第 2 版 (ISO 14705:2008) を取り消して置き換えるものです。
1 スコープ
この文書では、モノリシック ファイン セラミックスの室温でのビッカースおよびヌープ硬さを測定するための試験方法を規定しています。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 4545-1, 金属材料 — ヌープ硬さ試験 — 1: 試験方法
- ISO 4545-2, 金属材料 — ヌープ硬さ試験 — 2: 試験機の検証と校正
- ISO 4545-4, 金属材料 — ヌープ硬さ試験 — 4: 硬度値の表
- ISO 6507-1, 金属材料 — ビッカース硬さ試験 — 1: 試験方法
- ISO 6507-2, 金属材料 — ビッカース硬さ試験 — 2: 試験機の検証と校正
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1
ビッカース硬度
くぼみが変形していない圧子の痕跡であると仮定して、くぼみの測定された対角線の平均から計算されたくぼみの表面積で加えられた力を除算することによって得られる値
注記 1:ビッカース硬度は2つの異なる単位で表すことができます。加えられた力 (kgf) をくぼみの表面積 (mm 2 ) で割ります。
3.2
ビッカース圧子
底面が正方形で、向かい合う面の間の角度が 136° の直角ピラミッドの形状の圧子。
注記 1:表 1 および図 1 を参照。
3.3
ヌープ硬度
圧痕が変形していない圧子の痕跡であると仮定して、圧痕の長対角線の測定値から計算された圧痕の投影面積で加えられた力を除算することによって得られる値
注記 1:ヌープ硬さは 2 つの異なる単位で表すことができます: a) N 単位の加えられた力を mm 2単位のくぼみの投影面積で割ることによって得られる GPa の単位; b) ヌープ硬度数,加えられた力 (kgf) をくぼみの投影面積 (mm 2 ) で割って得られます。単位は指定されていません。
3.4
ヌープ圧子
172.5° と 130° の反対側のエッジ間の 2 つの角度を持つ菱形ベースのピラミッドの形状の圧子
注記 1:表 3 および図 6 を参照。
参考文献
| [1] | ISO 4545-3, 金属材料 — ヌープ硬さ試験 — 3: 参照ブロックのキャリブレーション |
| [2] | ISO 6507-3, 金属材料 — ビッカース硬さ試験 — 3: 参照ブロックのキャリブレーション |
| [3] | ISO 6507-4, 金属材料 — ビッカース硬さ試験 — 4: 硬度値の表 |
| [4] | Butterfield DM, Clinton DJ, Morell R.、「The VAMAS Hardness Test Round-Robin on Ceramic Materials」、VAMAS レポート No. 3, National Physical Laboratory, Teddington, Middlesex, TW11 0LW, UK, April 1989.Euroceramics, Vol. 3, 3.339-3.345 (1989) にまとめられ、Elsevier Science Publishers Ltd., London 発行。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
The committee responsible for this document is ISO/TC 206, Fine ceramics.
This third edition cancels and replaces the second edition (ISO 14705:2008), which has been technically revised.
1 Scope
This document specifies a test method for determining the Vickers and Knoop hardness of monolithic fine ceramics at room temperature.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 4545-1, Metallic materials — Knoop hardness test — 1: Test method
- ISO 4545-2, Metallic materials — Knoop hardness test — 2: Verification and calibration of testing machines
- ISO 4545-4, Metallic materials — Knoop hardness test — 4: Table of hardness values
- ISO 6507-1, Metallic materials — Vickers hardness test — 1: Test method
- ISO 6507-2, Metallic materials — Vickers hardness test — 2: Verification and calibration of testing machines
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
Vickers hardness
value obtained by dividing the applied force by the surface area of the indentation computed from the mean of the measured diagonals of the indentations, assuming that the indentation is an imprint of the undeformed indenter
Note 1 to entry: Vickers hardness may be expressed in two different units:a) with unit GPa, obtained by dividing the applied force in N by the surface area of the indentation in mm2;b) Vickers hardness number, obtained by dividing the applied force in kgf by the surface area of the indentation in mm2.
3.2
Vickers indenter
indenter in the shape of a right-angle pyramid with a square base and an angle between opposite faces of 136°
Note 1 to entry: See Table 1 and Figure 1.
3.3
Knoop hardness
value obtained by dividing the applied force by the projected area of the indentation computed from the measurement of the long diagonal of the indentation, assuming that the indentation is an imprint of the undeformed indenter
Note 1 to entry: The Knoop hardness may be expressed in two different units:a) with units of GPa, obtained by dividing the applied force in N by the projected area of the indentation in mm2;b) Knoop hardness number, obtained by dividing the applied force in kgf by the projected area of the indentation in mm2, without units specified.
3.4
Knoop indenter
indenter in the shape of a rhombic-based pyramid with the two angles between the opposite edges at 172,5° and 130°
Note 1 to entry: See Table 3 and Figure 6.
Bibliography
| [1] | ISO 4545-3, Metallic materials — Knoop hardness test — 3: Calibration of reference blocks |
| [2] | ISO 6507-3, Metallic materials — Vickers hardness test — 3: Calibration of reference blocks |
| [3] | ISO 6507-4, Metallic materials — Vickers hardness test — 4: Tables of hardness values |
| [4] | Butterfield D.M., Clinton D.J., Morell R., “The VAMAS Hardness Test Round-Robin on Ceramic Materials”, VAMAS Report No. 3, National Physical Laboratory, Teddington, Middlesex, TW11 0LW, UK, April 1989, summarized in Euroceramics, Vol. 3, 3.339-3.345 (1989), published by Elsevier Science Publishers Ltd., London. |