※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 3.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
この国際規格の一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 14897 は、技術委員会 ISO/TC 61, プラスチック、小委員会 SC 12, 熱硬化性材料によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 14897:2000) を取り消して置き換えるものです。主な技術的変更は、大幅に改善された精度データの組み込みです。
この規格は、ASTM D 4672, ポリウレタン原料の標準試験方法 - ポリオールの水分含有量の測定に基づいています。
注意 — この国際規格を使用する人は、通常の実験室の慣行に精通している必要があります。この規格は、その使用に関連する安全上の問題があったとしても、そのすべてに対処することを意図していません。適切な安全衛生慣行を確立し、使用前に国内の規制条件を確実に遵守することは、この規格のユーザーの責任です。
1 スコープ
この国際規格は、ポリウレタン原料として使用されるポリオールの水分含有量を測定するために使用される方法を規定しています。メソッド A は、カール フィッシャー測定の原理をより明確に定義するために組み込まれている手動の電流測定法です。アンペロメトリック法は、視覚的なエンドポイントを不明瞭にするのに十分な色を持つものを含む、幅広いポリオールに適用できます。方法 B には、自動アンペロメトリック手順と自動電量手順が含まれます。電量法は、校正を必要としない絶対法であり、アンペロメトリー法と比較して感度が向上します。
2 参考文献
次の規範文書には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。日付の記載された参考資料については、これらの刊行物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 3696:1987, 分析ラボ用水 — 仕様および試験方法
- ISO 6353-1:1982, 化学分析用試薬 — 1: 一般的な試験方法
- ISO 6353-2:1983, 化学分析用試薬 — 2: 仕様 - 最初のシリーズ
- ISO 6353-3:1987, 化学分析用試薬 — 3: 仕様 - 第 2 シリーズ
3 用語と定義
この国際規格の目的のために、次の用語と定義が適用されます。
3.1
ポリオール
イソシアネートとの反応に適した2つ以上のヒドロキシル基を含む有機化合物
3.2
ポリウレタン
有機ジイソシアネートまたはポリイソシアネートと、2 つ以上のヒドロキシル基を含む化合物との反応によって調製されるポリマー
注記 1:ポリウレタンは、熱硬化性、熱可塑性、硬質または軟質および柔軟、気泡または非気泡の場合があります。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14897 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 12, Thermosetting materials.
This second edition cancels and replaces the first edition (ISO 14897:2000), which has been technically revised. The principal technical change is the incorporation of significantly improved precision data.
The standard is based on ASTM D 4672, Standard Test Methods for Polyurethane Raw Materials — Determination of Water Content of Polyols.
CAUTION — Persons using this International Standard should be familiar with normal laboratory practice. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions prior to use.
1 Scope
This International Standard specifies methods used to measure the water content of polyols employed as polyurethane raw materials. Method A is a manual amperometric method which has been included to better define the principles of the Karl Fischer measurement. Amperometric methods are applicable to a wide range of polyols, including those which have enough colour to obscure a visual end-point. Method B includes an automated amperometric procedure and an automated coulometric procedure. The coulometric procedure is an absolute method that does not require calibration and gives improved sensitivity compared with amperometric methods.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 3696:1987, Water for analytical laboratory use — Specification and test methods
- ISO 6353-1:1982, Reagents for chemical analysis — 1: General test methods
- ISO 6353-2:1983, Reagents for chemical analysis — 2: Specifications — First series
- ISO 6353-3:1987, Reagents for chemical analysis — 3: Specifications — Second series
3 Terms and definitions
For the purposes of this International Standard, the following terms and definitions apply.
3.1
polyol
an organic compound containing two or more hydroxyl groups suitable for reaction with isocyanates
3.2
polyurethane
a polymer prepared by the reaction of an organic di- or polyisocyanate with compounds containing two or more hydroxyl groups
Note 1 to entry: Polyurethanes may be thermosetting, thermoplastic, rigid or soft and flexible, cellular or non-cellular.