※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 15027-3 は、ISO と CEN 間の技術協力に関する協定 (ウィーン協定) に従って、欧州標準化委員会 (CEN) 技術委員会 CEN/TC 162 「手と腕の保護および救命胴衣を含む保護服」と、ISO/TC 188 技術委員会「小型船舶」サブ委員会 SC 1「個人用安全装置」との協力により作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 15027-3:2002) を廃止し、置き換えます。
主な技術的な変更は次のとおりです。
- a)被験者が人間の被験者であることを明確にする。
- b)皮膚温度測定のための 2 つのサイトの追加。
- c)視野検査の見直し。
- d) 3.10 と 3.11 を 1 つの条項に統合し、連続する条項の番号を付け直す。
- e)平均体温が削除される。
- f)下着は製造業者によって指定されるべきであることの明確化
- g)クラス D スーツのテストに関する要件の改訂。
ISO 15027 は、イマージョン スーツという一般タイトルのもと、次の部分で構成されています。
- Part 1: 常時着用スーツ、安全性を含む要件
- Part 2: 放棄スーツ、安全性を含む要件
- Part 3: テスト方法
1 スコープ
ISO 15027 のこの部分では、ヘリコプター輸送スーツや放棄スーツなどの常時着用スーツの試験方法を指定しています。
常時着用スーツの要件は ISO 15027-1:2012 に規定されており、廃棄スーツの要件は ISO 15027-2:2012 に規定されています。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- EN 590, 自動車燃料 - ディーゼル - 要件と試験方法
- ISO 811, 繊維織物 — 耐水浸透性の測定 — 静水圧試験
- ISO 1240, 個人用浮力装置
- ISO 13935-2, 繊維 — 生地および繊維製品の縫い目引張特性 — Part 2: グラブ法を使用した縫い目破断に対する最大力の決定
- ISO 15027-1:2012, イマージョンスーツ — Part 1: 常時着用スーツ、安全性を含む要件
- ISO 15027-2:2012, イマージョンスーツ — Part 2: 放棄スーツ、安全性を含む要件
参考文献
| 1 | EN 340, 防護服 — 一般要件 |
| 2 | ISO 9886, 人間工学 — 生理学的測定による熱ひずみの評価 |
| 3 | ISO 10551, 熱環境の人間工学 — 主観的判断尺度を使用した熱環境の影響の評価 |
| 4 | ISO 12894, 熱環境の人間工学 — 極度の高温または低温環境にさらされた個人の医学的監督 |
| 5 | 2000 年のエディンバラで修正されたヘルシンキ宣言 (世界医師協会、1964 年) |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15027-3 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets, in collaboration with Technical Committee ISO/TC 188, Small craft, Subcommittee SC 1, Personal safety equipment, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 15027-3:2002), which has been technically revised.
The main technical changes are:
- a) clarification that test subjects are human test subjects;
- b) addition of two sites for skin temperature measurement;
- c) revision of field of vision test;
- d) merger of 3.10 and 3.11 into one clause and renumbering of consecutive clauses;
- e) mean body temperature deleted;
- f) clarification that underclothing shall be specified by the manufacturer
- g) revision of requirements regarding the testing of a Class D suit.
ISO 15027 consists of the following parts, under the general title Immersion suits:
- Part 1: Constant wear suits, requirements including safety
- Part 2: Abandonment suits, requirements including safety
- Part 3: Test methods
1 Scope
This part of ISO 15027 specifies the test methods for constant wear suits, including helicopter transit suits, and abandonment suits.
Requirements for constant wear suits are given in ISO 15027-1:2012 and requirements for abandonment suits are given in ISO 15027-2:2012.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- EN 590, Automotive fuels — Diesel — Requirements and test methods
- ISO 811, Textile fabrics — Determination of resistance to water penetration — Hydrostatic pressure test
- ISO 12402 (all parts), Personal flotation devices
- ISO 13935-2, Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
- ISO 15027-1:2012, Immersion suits — Part 1: Constant wear suits, requirements including safety
- ISO 15027-2:2012, Immersion suits — Part 2: Abandonment suits, requirements including safety
Bibliography
| 1 | EN 340, Protective clothing — General requirements |
| 2 | ISO 9886, Ergonomics — Evaluation of thermal strain by physiological measurements |
| 3 | ISO 10551, Ergonomics of the thermal environment — Assessment of the influence of the thermal environment using subjective judgement scales |
| 4 | ISO 12894, Ergonomics of the thermal environment — Medical supervision of individuals exposed to extreme hot or cold environments |
| 5 | Declaration of Helsinki (World Medical Association, 1964) as amended at Edinburgh 2000 |