※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、次の情報を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書は、ISO/TC 28 技術委員会、天然または合成源からの石油および関連製品、燃料および潤滑剤によって作成されました。
ISO 15029-2 のこの初版は、技術的に改訂された ISO/TS 15029-2:2012 を取り消し、置き換えます。定義と一部の手順は、市場から受け取ったコメントに基づいてさらに明確化されました。この方法は現在、仕様と流体開発において ISO 15029-1 の古い手順に大きく取って代わりました。 ISO 15029-1 とは異なり、この文書はスプレーの可燃性の観点から流体をランク付けできる方法であり、いくつかの試験装置が利用可能であるため、ある程度の正確なデータを生成することができます。
ISO 15029 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
警告この文書の使用には、危険な物質、作業、および機器が含まれる可能性があります。この文書は、その使用に関連するすべての安全上の問題に対処することを目的とするものではありません。この規格を適用する前に従業員の健康と安全を保護するための適切な措置を確保し、その他の制限の適用可能性を判断することは、この規格の使用者の責任です。
1 スコープ
この文書は、耐火性流体の加圧スプレーによる火災の危険性を比較する方法を指定します。 2 つのサイズのプロパン炎を使用して、液体の空気噴霧放出の点火と燃焼を安定させます。熱発生率、炎の長さ、煙の密度に関連する測定により、流体の火災挙動に関する定量的な情報が得られます。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3170, 石油系液体 - 手動サンプリング
- ISO 3696:1987, 分析実験室用水 — 仕様および試験方法
- ISO 9162, 石油製品 - 燃料 (クラス F) - 液化石油ガス - 仕様
- IEC 60584-1, 熱電対 - Part 1: EMF 仕様と許容差
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
安定したスプレー炎
エネルギー放出率、火炎の長さ、その他の燃焼特性が時間の関数として安定し、実用的な時間平均値を計算できる点
3.2
炎の長さ
ガスバーナーの垂直中心線から目に見える炎が到達する最も遠い下流点までのミリメートル単位の距離
3.3
炎の長さの指標
最も近い整数に補正された火炎長とプロパン流量の関数
3.4
着火係数
最も近い整数に補正された特定のプロパン流量における熱放出の関数
3.5
煙の密度
試験流体の導入前後に測定された煙道管内の煙の不透明度の関数
注記 1: ISO 5659-2:2017, 3.8 を参照。
参考文献
| 1 | ISO 5659-2:2017, プラスチック - 発煙Part 2: 単一チャンバー試験による光学濃度の決定 |
| 2 | ISO 6743-4, 潤滑油、工業用オイルおよび関連製品 (クラス L — 分類 — Part 4: ファミリ H (油圧システム) |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established, has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 28, Petroleum and related products, fuels and lubricants from natural or synthetic sources.
This first edition of ISO 15029-2 cancels and replaces ISO/TS 15029-2:2012 which has been technically revised. Definitions and some procedural steps have been further clarified based on comments received from the market. This method has now largely superseded the older procedure in ISO 15029-1 in specifications and fluid development. Unlike ISO 15029-1, this document is a method that can rank fluids in terms of their spray flammability and as several test rigs are available, is capable of the generation of some precision data.
A list of all parts in the ISO 15029 series can be found on the ISO website.
WARNING Use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this standard to ensure appropriate measures to safeguard the health and safety of personnel prior to application of the standard, and to determine the applicability of any other restrictions.
1 Scope
This document specifies a method by which the fire hazards of pressurised sprays of fire-resistant fluids can be compared. Two sizes of propane flame are used to ignite and stabilise combustion of an air-atomised release of fluid. Measurements related to the rate of heat release, length of flame and density of smoke give quantitative information on the fire behaviour of the fluid.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3170, Petroleum liquids — Manual sampling
- ISO 3696:1987, Water for analytical laboratory use — Specification and test methods
- ISO 9162, Petroleum products — Fuels (class F) — Liquefied petroleum gases — Specifications
- IEC 60584-1, Thermocouples — Part 1: EMF specifications and tolerances
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
stabilised spray flame
point at which the rate of energy release, flame length and other combustion properties, are steady as a function of time, so that sensible time-averaged values can be calculated
3.2
flame length
distance in millimetres from the vertical centre line of the gas burner to the furthest downstream point reached by the visible flame
3.3
flame length index
function of the flame length and propane flow rate corrected to the nearest integer
3.4
ignitability factor
function of heat release at a specific propane flow rate corrected to the nearest integer
3.5
smoke density
function of smoke opacity in the flue pipe measured before and after introduction of the test fluid
Note 1 to entry: See ISO 5659-2:2017, 3.8.
Bibliography
| 1 | ISO 5659-2:2017, Plastics — Smoke generation Part 2: Determination of optical density by a single chamber test |
| 2 | ISO 6743-4, Lubricants, industrial oils and related products (class L — Classification — Part 4: Family H (Hydraulic systems) |