※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 3 に規定されている規則に従って起草されています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 15087-1 は、技術委員会 ISO/TC 106, 歯科、小委員会 SC 4, 歯科器具によって作成されました。
ISO 15087 は、歯科用エレベーターという一般的なタイトルの下に、次の部分で構成されています。
- Part 1: 一般要件
- Part 2: ワーウィック ジェームスのエレベーター
- Part 3: クライヤー エレベーター
- Part 4: クープランド エレベータ
- Part 5: レッグ エレベーター
- Part 6: フロールのエレベーター
ISO 15087 のこの部分の附属書 A から D は、情報提供のみを目的としています。
1 スコープ
ISO 15087 のこのパートでは、歯科用エレベーターの一般的な材料および性能要件を指定しています。
2 参考文献
以下の規範文書には、このテキストで参照することにより、ISO 15087 のこの部分の規定を構成する規定が含まれています。ただし、ISO 15087 のこの部分に基づく契約の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 1942-3:1989, 歯科語彙 — Part 3: 歯科用器具。
- ISO 2592, 石油製品 — 引火点および発火点の測定 — クリーブランド オープン カップ法。
- ISO 3104, 石油製品 — 透明および不透明な液体 — 動粘度の測定および動的粘度の計算。
- ISO 6507-1:1997, 金属材料 — ビッカース硬度試験 — Part 1: 試験方法。
- ISO 7153-1:1991, 外科用器具 — 金属材料 — Part 1: ステンレス鋼。
- ISO 13402, 外科用および歯科用ハンドインスツルメント — オートクレーブ、腐食および熱暴露に対する耐性の決定。
3 用語と定義
ISO 15087 のこの部分の目的のために、ISO 1942-3 に示されている用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 15087-1 was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 4, Dental instruments.
ISO 15087 consists of the following parts, under the general title Dental elevators:
- Part 1: General requirements
- Part 2: Warwick James elevators
- Part 3: Cryer elevators
- Part 4: Coupland elevators
- Part 5: Bein elevators
- Part 6: Flohr elevators
Annexes A to D of this part of ISO 15087 are for information only.
1 Scope
This part of ISO 15087 specifies the general material and performance requirements for dental elevators.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of ISO 15087. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 15087 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 1942-3:1989, Dental vocabulary — Part 3: Dental instruments.
- ISO 2592, Petroleum products — Determination of flash and fire points — Cleveland open cup method.
- ISO 3104, Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity.
- ISO 6507-1:1997, Metallic materials — Vickers hardness test — Part 1: Test method.
- ISO 7153-1:1991, Surgical instruments — Metallic materials — Part 1: Stainless steel.
- ISO 13402, Surgical and dental hand instruments — Determination of resistance against autoclaving, corrosion and thermal exposure.
3 Terms and definitions
For the purposes of this part of ISO 15087, the terms and definitions given in ISO 1942-3 apply.