※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 15179 は、技術委員会 ISO/TC 17, 鉄鋼、小委員会 SC 12, 連続ミル フラット圧延製品によって作成されました。
1 スコープ
この国際規格は、構造品質と高強度鋼の熱間圧延双ロール鋳造鋼板の特性を規定しています。この製品は、特定の機械的特性が必要な用途向けです。通常、納品された状態で使用され、ボルト、リベット、または溶接された構造を対象としています。この製品は、プレートミルではなく、ワイドストリップミルで生産されています。
構造品質の双ロール鋳鋼シートは、指定された機械的特性に合わせて製造された炭素鋼で、さまざまなグレードが用意されています (表 5 を参照)
マイクロアロイで強化された高強度双ロール鋳造鋼板は、指定された機械的特性に合わせて製造され、さまざまなグレードとクラスで入手できます (表 6 を参照)
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 6892-1, 金属材料 — 引張試験 — 1: 室温での試験方法
- ISO 16160, 熱間圧延鋼板製品 - 寸法および形状の公差
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
マイクロアロイ元素
ニオブ、バナジウム、チタンなどの元素を単独または組み合わせて添加して、同等の強度で製造された非合金鋼と比較して、より高い成形性、溶接性、および靭性と組み合わせてより高い強度レベルを得る
3.2
熱延スケール除去鋼板
酸溶液中での酸洗いによって、酸化物またはスケールが除去された熱間圧延鋼板。
3.3
ミルエッジ
熱間圧延で生成される明確な輪郭のない通常の側面エッジ
注記 1:ミルエッジには、ひび割れや裂け目、または薄い (フェザリング) エッジなどの不規則性が含まれる場合があります。
3.4
せん断エッジ
エッジ プロダクト ミル エッジ プロダクトをせん断、スリッティング、またはトリムすることによって得られる通常のエッジ
注記 1通常の処理では、必ずしもスリッティングバーの明確な位置が得られるとは限りません。
3.5
双ロール鋳鋼板
最終的な厚さを達成するための最小限の熱間圧延で、液体金属から直接、ほぼ最終的な厚さまで鋳造することによって製造された鋼板。
参考文献
| [1] | ASTM A1039/A1039M-10, スチール、シート、熱間圧延、炭素、商業用、構造用、高強度低合金の標準仕様、ツインロール鋳造プロセスで製造1 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15179 was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 12, Continuous mill flat rolled products.
1 Scope
This International Standard specifies the characteristics of hot-rolled twin-roll cast steel sheet of structural quality and high strength steel. The product is intended for applications where specific mechanical properties are required. It is generally used in the delivered condition and is intended for bolted, riveted or welded structures. This product is produced on a wide strip mill, not a plate mill.
Structural quality twin-roll cast steel sheet is a carbon steel produced to specified mechanical properties and is available in a number of grades (see Table 5).
High strength twin-roll cast steel sheet, strengthened by microalloys, is produced to specified mechanical properties and is available in a number of grades and classes (see Table 6).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 6892-1, Metallic materials — Tensile testing — 1: Method of test at room temperature
- ISO 16160, Hot-rolled steel sheet products — Dimensional and shape tolerances
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
microalloying element
element, such as niobium, vanadium, titanium, added singly or in combination to obtain higher strength levels combined with better formability, weldability and toughness as compared with non-alloy steel produced to equivalent strength
3.2
hot-rolled descaled steel sheet
hot-rolled steel sheet from which oxide or scale has been removed, commonly by pickling in an acid solution
3.3
mill edge
normal side edge without any definite contour produced in hot rolling
Note 1 to entry: Mill edges may contain some irregularities, such as cracked or torn edges or thin (feathered) edges.
3.4
sheared edge
edge product normal edge obtained by shearing, slitting or trimming a mill edge product
Note 1 to entry: Normal processing does not necessarily provide a definite positioning of the slitting burr.
3.5
twin-roll cast steel sheet
steel sheet produced by casting to near final thickness directly from the liquid metal with minimal hot rolling to achieve the final thickness
Bibliography
| [1] | ASTM A1039/A1039M-10, Standard Specification for Steel, Sheet, Hot- Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by the Twin-Roll Casting Process1 |