※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 3 に規定されている規則に従って起草されています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
この国際規格の一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
国際規格 ISO 15324 は、技術委員会 ISO/TC 156, 金属および合金の腐食によって作成されました。
この国際規格の附属書 A, B, および C は、情報提供のみを目的としています。
1 スコープ
1.1この国際規格は、塩化ナトリウム滴蒸発システムにおける応力腐食割れに対するステンレス鋼およびニッケル基合金の相対抵抗を決定するための手順を規定しています。
1.2この方法により、破壊に対する閾値応力が得られ、その大きさを使用して、この環境でのさまざまな合金の相対的な性能をランク付けできます。
2 参考文献
次の規範文書には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。日付の記載された参考資料については、これらの刊行物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 3696:1987, 分析実験室用水 — 仕様および試験方法。
- ISO 4287:1997, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters.
- ISO 4288:1996, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedure for the assessment of surface texture.
- ISO 7539-1:1987, 金属および合金の腐食 - 応力腐食試験 - Part 1: 試験手順に関する一般的なガイダンス。
3 用語と定義
この国際規格の目的のために、次の用語と定義が適用されます。
3.1
閾値応力
500時間で破壊が観察されない応力
3.2
壊れるまでの時間
試験開始から試験片破断までの経過時間
参考文献
| [1] | ISO 7539-4:1989, 金属および合金の腐食 - 応力腐食試験 - Part 4: 単軸負荷引張試験片の準備と使用。 |
| [2] | JK プロジェクト 499/74 の最終報告書、塩化物を含む媒体中のステンレス鋼の SCC の新しい加速試験、Sture Henriksson および Mats Asberg, AB Atomenergi, Studsvik, スウェーデン、Jernkntoret Forskning, スウェーデン。 |
| [3] | MTIマニュアルNo. 3, MTIプロジェクトNo. 9, 新しい錬鉄およびニッケルベースの耐食性合金に関するガイドライン情報、フェーズ 1, 腐食試験方法;付録 E, 塩化ナトリウム滴蒸発システムにおける応力腐食割れに対する相対耐性のための錬鉄およびニッケル基合金の実験室試験のための方法 MTI-5 、RS Treseder, 1980 年 5 月、化学プロセス産業の材料技術研究所、Inc. . |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 15324 was prepared by Technical Committee ISO/TC 156, Corrosion of metals and alloys.
Annexes A, B and C of this International Standard are for information only.
1 Scope
1.1 This International Standard specifies the procedure for determining the relative resistance of stainless steels and nickel-base alloys to stress corrosion cracking in a sodium chloride drop evaporation system.
1.2 The method results in a threshold stress to fracture, the magnitude of which can be used to rank the relative performance of different alloys for this environment.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 3696:1987, Water for analytical laboratory use — Specification and test methods.
- ISO 4287:1997, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters.
- ISO 4288:1996, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture.
- ISO 7539-1:1987, Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures.
3 Terms and definitions
For the purposes of this International Standard, the following terms and definitions apply.
3.1
threshold stress
stress below which no fracture in 500 h is observed
3.2
time-to-fracture
elapsed time from start of test until fracture of the specimen
Bibliography
| [1] | ISO 7539-4:1989, Corrosion of metals and alloys — Stress corrosion testing — Part 4: Preparation and use of uniaxially loaded tension specimens. |
| [2] | Final report for JK project 499/74, New accelerated test for SCC of stainless steel in chloride-containing media, Sture Henriksson and Mats Asberg, AB Atomenergi, Studsvik, Sweden, Jernkntoret Forskning, Sweden. |
| [3] | MTI manual No. 3, MTI Project No. 9, Guideline information on newer wrought iron- and nickel-base corrosion resistant alloys, Phase 1, Corrosion Test Methods; Appendix E, Method MTI-5 for laboratory testing of wrought iron and nickel-base alloys for relative resistance to stress corrosion cracking in a sodium chloride drop evaporation system, R. S. Treseder, May, 1980, Materials Technology Institute of the Chemical Process Industries, Inc. |