※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 3 部に規定されている規則に従って草案されています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この国際規格の要素の一部が特許権の対象となる可能性が注目されています。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
国際規格 ISO 15373 は、技術委員会 ISO/TC 61, プラスチック、サブ委員会 SC 9, 熱可塑性材料によって作成されました。
警告 - この国際規格には、危険な化学物質、材料、作業が含まれる可能性があります。この国際規格は、その使用に関連する安全上の問題があったとしても、そのすべてに対処することを目的とするものではありません。適切な安全衛生慣行を確立し、使用前に規制上の制限の適用性を判断することは、この国際規格の使用者の責任です。
1 スコープ
この国際規格には、ポリマー分散液中の遊離ホルムアルデヒド (HCHO) を測定するための 2 つの方法が記載されています。この手順は、アクリル、アクリロニトリルブタジエン、カルボキシル化スチレンブタジエン、酢酸ビニルポリマー分散液を使用して評価されました。両方の試験方法は、他の組成物のポリマー分散液にも適用できる可能性があります。
方法 A は、遊離ホルムアルデヒド含有量が 10 mg/kg を超えるポリマー分散液に好ましい方法です。より低いホルムアルデヒド含有量を決定する必要がある場合、または調停分析を実行する必要がある場合は、方法 B をお勧めします。
どちらの方法も、ポリマー分散液の物理的または化学的特性の変化によって生じる可能性がある遊離ホルムアルデヒド濃度の変化を最小限に抑えます。
これらの方法を説明した方法で使用する場合、既知の制限はありません。
2 規範的参照
以下の規範文書には、本文中の参照を通じてこの国際規格の規定を構成する規定が含まれています。日付が古い参照については、これらの出版物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することが推奨されます。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
参考文献
| 1 | ASTM D 1193, 試薬水の標準仕様。 |
| 2 | ASTM D 2194, ホルムアルデヒド溶液の濃度に関する標準試験方法。 |
| 3 | ASTM E 682, 液体クロマトグラフィーの標準慣行の用語と関係。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 15373 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic materials.
WARNING - This International Standard may involve hazardous chemicals, materials and operations. This International Standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1 Scope
This International Standard describes two methods for the determination of free formaldehyde (HCHO) in polymer dispersions. The procedure has been evaluated using acrylic, acrylonitrile butadiene, carboxylated styrenebutadiene and vinyl acetate polymer dispersions. Both test methods may also be applicable to polymer dispersions of other compositions.
Method A is the preferred method for polymer dispersions with a free-formaldehyde content higher than 10 mg/kg. Method B is recommended if lower formaldehyde contents have to be determined or arbitration analyses have to be carried out.
Both methods minimize changes in free-formaldehyde concentration that can result from changes in the physical or chemical properties of polymer dispersions.
There are no known limitations to these methods when used in the manner described.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 2227, Formaldehyde solutions for industrial use - Determination of formaldehyde content.
- ISO 3696, Water for analytical laboratory use - Specification and test methods.
Bibliography
| 1 | ASTM D 1193, Standard Specification for Reagent Water. |
| 2 | ASTM D 2194, Standard Test Method for Concentration of Formaldehyde Solutions. |
| 3 | ASTM E 682, Standard Practice for Liquid Chromatography Terms and Relationships. |