※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 3 部に規定されている規則に従って草案されています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
ISO 15534 のこの部分の要素の一部が特許権の対象となる可能性が注目されています。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
国際規格 ISO 15534-2 は、ISO/TC 159 技術委員会、人間工学、 SC 3 分科会、人体測定および生体力学によって作成されました。
ISO 15534 は、 「機械の安全のための人間工学に基づいた設計」という一般タイトルのもと、次の部分で構成されています。
- Part 1: 機械への全身アクセスのための開口部に必要な寸法を決定するための原則
- Part 2: アクセス開口部に必要な寸法を決定するための原則
- Part 3: 人体計測データ
付属書 A は、ISO 15534 のこの部分の規範部分を形成します。付属書 B および C は情報提供のみを目的としています。
導入
ISO 15534 のこの部分は、機械の安全性に関するいくつかの人間工学規格の 1 つです。
EN 614-1 (参考文献の [2]) では、人間工学的要因を考慮するために設計者が採用すべき原則について説明しています。 ISO 15534 のこの部分では、これらの原則をアクセス開口部の設計にどのように適用すべきかが説明されています。
ISO 15534 のこの部分は、機械指令および関連する欧州自由貿易協会 (EFTA) の規制に準拠する調和規格として作成された EN 547-2:1996 に基づいています。
1 スコープ
ISO 15534 のこの部分では、ISO/TR 12100-1 で定義されているように、機械にアクセスするための開口部の寸法を指定します。 ISO 15534-3 で与えられた値が適用される寸法を示します。追加のスペース要件の値は付録 A に記載されています。ISO 15534 のこの部分は主に非移動機械向けに作成されています。モバイル機器には追加の特定の要件がある場合があります。
アクセス開口部の寸法は 95 パーセンタイルの値に基づいており、到達距離は 5 パーセンタイルの値に基づいており、いずれの場合も、予想されるユーザー集団の最も好ましくない身体寸法が基準として使用されます。アクセス開口部の位置にも同じ考慮事項が当てはまります。
ISO 15534-3 に記載されている人体計測データは、裸の人の静的測定に基づいており、体の動き、衣服、装備、機械の動作条件、環境条件は考慮されていません。
ISO 15534 のこの部分では、これらの要因を考慮に入れるために、人体計測データと適切な許容値を組み合わせる方法が示されています。
人々が危険な場所に到達することを防止すべき状況where 、ISO 13852 で扱われます。
2 規範的参照
以下の規範文書には、本文での参照を通じて ISO 15534 のこの部分の規定を構成する規定が含まれています。日付が記載された参照については、これらの出版物のその後の修正または改訂は適用されません。ただし、ISO 15534 のこの部分に基づく契約の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することが推奨されます。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO/TR 12100-1:1992, 機械の安全性 — 基本概念、設計の一般原則 — Part 1: 基本用語、方法論。 (EN 292-1:1991)
- ISO 13852:1996, 機械の安全性 - 上肢が危険ゾーンに到達するのを防ぐための安全距離。 (EN 294:1992)
- ISO 15534-3:2000, 機械の安全のための人間工学に基づいた設計 — Part 3: 人体計測データ。
参考文献
| 1 | ISO 7250:1996, 技術設計のための基本的な人体測定。 (EN ISO 7250:1997 ) |
| 2 | EN 614-1:1995, 機械の安全性 — 人間工学に基づいた設計原則 — Part 1: 用語と一般原則。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 15534 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 15534-2 was prepared by Technical Committee ISO/TC 159, Ergonomics, Subcommittee SC 3, Anthropometry and biomechanics.
ISO 15534 consists of the following parts, under the general title Ergonomic design for the safety of machinery:
- Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
- Part 2: Principles for determining the dimensions required for access openings
- Part 3: Anthropometric data
Annex A forms a normative part ot this part of ISO 15534. Annexes B and C are for information only.
Introduction
This part of ISO 15534 is one of several ergonomics standards for the safety of machinery.
EN 614-1 ([2] in the Bibliography) describes the principles designers should adopt in order to take account of ergonomic factors. This part of ISO 15534 describes how these principles should be applied to the design of access openings.
This part of ISO 15534 is based on EN 547-2:1996 that was prepared as a harmonized standard conforming with the Machinery Directive and associated European Free Trade Association (EFTA) regulations.
1 Scope
This part of ISO 15534 specifies the dimensions of openings for access into machinery as defined in ISO/TR 12100-1. It provides the dimensions to which the values given in ISO 15534-3 are applicable. Values for additional space requirements are given in annex A. This part of ISO 15534 has been prepared primarily for non-mobile machinery; there may be additional specific requirements for mobile machinery.
Dimensions for access openings are based on the values for the 95th percentile, whereas reach distances are based on the values for the 5th percentile, in each case the least favourable body dimension of the expected user population being used as a basis. The same considerations apply to the location of access openings.
The anthropometric data given in ISO 15534-3 originate from static measurements of nude persons and do not take into account body movements, clothing, equipment, machinery-operating conditions or environmental conditions.
This part of ISO 15534 shows how to combine the anthropometric data with suitable allowances to take these factors into account.
Situations where people are to be prevented from reaching a hazard are dealt with in ISO 13852.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of ISO 15534. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 15534 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO/TR 12100-1:1992, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology. (EN 292-1:1991)
- ISO 13852:1996, Safety of machinery — Safety distances to prevent danger zones being reached by the upper limbs. (EN 294:1992)
- ISO 15534-3:2000, Ergonomic design for the safety of machinery — Part 3: Anthropometric data.
Bibliography
| 1 | ISO 7250:1996, Basic human body measurements for technological design. (EN ISO 7250:1997) |
| 2 | EN 614-1:1995, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles. |