この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 15726 は、技術委員会 ISO/TC 107, 金属およびその他の無機コーティング、小委員会 SC 3, 電着コーティングおよび関連仕上げによって作成されました。
序章
ニッケル、コバルト、または鉄を含む電着亜鉛合金コーティングは、同等の厚さの電着亜鉛コーティングよりもはるかに耐食性があります。合金コーティングは鋼に対して陽極性ですが、純粋な亜鉛ほどではありません。元々は、自動車ボディ パネルの製造用のスチールの連続コーティング用に開発されましたが、個々のコンポーネントのラック アンド バレル電気メッキに適した亜鉛合金電気メッキ プロセスが利用できるようになりました。
亜鉛ニッケル合金の場合、制御されたニッケル含有量の堆積物を生成する独自の酸およびアルカリ電気めっきプロセスが存在します。 8% または 12% のニッケルを含む亜鉛-ニッケル コーティングが最も広く使用されており、カドミウム コーティングの代用品として考えられることがよくあります。報告によると、亜鉛ニッケル合金コーティングは、ブラシ電気めっき技術によって適用できます。
合金コーティングは、耐食性をさらに高めるために、クロメート化成コーティング、有機シーラント、およびその他の補助処理と組み合わせて使用されることが多く、多くの場合、有機コーティングを適用するためのベースとして機能します。亜鉛-コバルトおよび亜鉛-ニッケル合金コーティング用に特別に調合されたクロメート化成コーティングは、黄色からブロンズ色の表面を生成するために利用できます。
警告 — この国際規格は、一部の国の健康と安全に関する法律に準拠していない可能性があり、適切な安全対策が講じられていない場合、健康に害を及ぼす可能性のある物質および/または手順の使用を求めています。この国際規格は、その使用に関連する健康上の危険、安全または環境問題、および法律には対応していません。この国際規格の使用者は、適切な健康、安全、および環境的に許容される慣行を確立し、国内および国際規制に準拠するための適切な措置を講じる責任があります。この国際規格への準拠は、それ自体が法的義務から免除されるわけではありません。
1 スコープ
この国際規格は、ニッケル、コバルト、または鉄を含む電着亜鉛合金コーティングの要件をカバーしています。電着塗装、クロメート化成処理、その他の付帯処理の指定方法です。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 2064, 金属およびその他の無機コーティング - 厚さの測定に関する定義と規則
- ISO 2080, 金属およびその他の無機コーティング — 表面処理、金属およびその他の無機コーティング — 語彙
- ISO 2819, 金属基材上の金属コーティング — 電着および化学蒸着コーティング — 接着性試験に利用可能な方法のレビュー
- ISO 3882, 金属およびその他の無機コーティング - 厚さの測定方法のレビュー
- ISO 4518, 金属コーティング — コーティングの厚さの測定 — 形状測定法
- ISO 4519, 電着金属コーティングおよび関連する仕上げ - 属性による検査のためのサンプリング手順
- ISO 9587, 金属およびその他の無機コーティング - 水素脆化のリスクを軽減するための鉄または鋼の前処理
- ISO 9588, 金属およびその他の無機コーティング - 水素脆化のリスクを軽減するための鉄または鋼のコーティング後処理
- ISO 10308, 金属コーティング — 気孔率試験のレビュー
- ISO 10309, 金属コーティング — 気孔率試験 — フェロキシル試験
- ASTM B117, 塩水噴霧 (霧) を操作するための標準プラクティス - 装置
3 用語と定義
このドキュメントでは、ISO 2064, ISO 2080, ISO 9587, および ISO 9588 の用語と定義が適用されます。
参考文献
| [1] | ISO 1463, 金属および酸化物コーティング — コーティングの厚さの測定 — 顕微鏡法 |
| [2] | ISO 2177, 金属コーティング — コーティングの厚さの測定 — 陽極溶解による電量法 |
| [3] | ISO 2178, 磁性基板上の非磁性コーティング - コーティングの厚さの測定 - 磁気法 |
| [4] | ISO 3497, 金属コーティング — コーティングの厚さの測定 — X 線分光法 |
| [5] | ISO 3543, 金属および非金属コーティング — 厚さの測定 — ベータ後方散乱法 |
| [6] | ISO 3613, 亜鉛、カドミウム、アルミニウム-亜鉛合金および亜鉛-アルミニウム合金のクロメート化成コーティング - 試験方法 |
| [7] | ISO 3868, 金属およびその他の非有機コーティング — コーティングの厚さの測定 — フィゾー マルチビーム干渉法 |
| [8] | ISO 4520, 電気めっき亜鉛およびカドミウム コーティング上のクロメート化成コーティング |
| [9] | ISO 9220, メタリックコーティング — コーティングの厚さの測定 — 走査型電子顕微鏡法 |
| [10] | ISO 9227, 人工大気中での腐食試験 — 塩水噴霧試験 |
| [11] | ISO 10111, 金属およびその他の無機コーティング — 単位面積あたりの質量の測定 — 重量および化学分析方法のレビュー |
| [12] | ISO 10587, 金属およびその他の無機コーティング — 金属コーティングされたおよびコーティングされていない雄ねじ付きの物品およびロッドの残留脆化の試験 — 傾斜くさび法 |
| [13] | ISO 15724, 金属およびその他の無機コーティング — 鋼中の拡散性水素の電気化学測定 — バーナクル電極法 |
| [14] | ISO 27830, メタリックおよびその他の無機コーティング - メタリックおよび無機コーティングを指定するためのガイドライン |
| [15] | ISO 27831-1, 金属およびその他の無機コーティング — 金属表面の洗浄と準備 — 1: 鉄金属および合金 |
| [16] | ISO 27831-2, 金属およびその他の無機コーティング — 金属表面の洗浄と準備 — 2: 非鉄金属および合金 |
| [17] | ASTM B840:1999, 亜鉛コバルト合金堆積物用電着コーティングの標準仕様 |
| [18] | ASTM B841:1999, 亜鉛ニッケル合金堆積物用電着コーティングの標準仕様 |
| [19] | ASTM B842:1999, 亜鉛鉄合金堆積物用電着コーティングの標準仕様 |
| [20] | ASTM E 527, 統一番号付けシステム (UNS) における金属および合金の番号付けの標準プラクティス |
| [21] | DIN 50692:1998, 電着コーティング - 鉄材料のクロメート亜鉛合金コーティング |
| [22] | ボールドウィン、KR, ロビンソン、MJ およびスミス、 CJE 電着亜鉛ニッケル合金コーティングの耐食性。腐食科学、 35(8) 、1993 年、p. 1267 |
| [23] | H all 、DE, 電着亜鉛ニッケル合金コーティング — レビュー。めっきおよび表面仕上げ、 70(11) 、1983 年、p. 59 |
| [24] | ワトソン、SA自動車業界で使用するための亜鉛ニッケル合金電気めっきスチール コイル。 NiDIレビューシリーズNo. 13 001, ニッケル開発研究所、トロント、オンタリオ、カナダ、1988 |
| [25] | Zaki , N. Zinc-Nickel Alloy Plating, Metal Finishing , 76(6) , 1989, p. 57 |
| [26] | Ray, GP Thickness testing of electroplated and related Coatings, 第 2 nd 、1993 年、Electrochemical Publications Ltd, Isle of Man, UK, ISBN 0 ay 27 4 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15726 was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings, Subcommittee SC 3, Electrodeposited coatings and related finishes.
Introduction
Electrodeposited zinc alloy coatings containing nickel, cobalt or iron are significantly more corrosion-resistant than electrodeposited zinc coatings of equivalent thickness. The alloy coatings are anodic to steel, but less so than pure zinc. Although originally developed for the continuous coating of steel for the fabrication of automobile body panels, zinc alloy electroplating processes have become available that are suitable for the rack and barrel electroplating of individual components.
In the case of zinc-nickel alloys, proprietary acid and alkaline electroplating processes exist that yield deposits with controlled nickel contents. Zinc-nickel coatings containing either 8 % or 12 % nickel are most widely used, and are often considered possible substitutes for cadmium coatings. Zinc-nickel alloy coatings can reportedly be applied by brush electroplating techniques.
The alloy coatings are often used in combination with chromate conversion coatings, organic sealants and other supplementary treatments to further enhance corrosion resistance, and often serve as the base for applying organic coatings. Chromate conversion coatings formulated specifically for use with zinc-cobalt and zinc-nickel alloy coatings are available for producing yellow- to bronze-coloured surfaces.
WARNING — This International Standard may not be compliant with some countries' health and safety legislation, and calls for the use of substances and/or procedures that may be injurious to health if adequate safety measures are not taken. This International Standard does not address any health hazards, safety or environmental matters and legislation associated with its use. It is the responsibility of the user of this International Standard to establish appropriate health, safety and environmentally acceptable practices and take suitable actions to comply with any national and international regulations. Compliance with this International Standard does not of itself confer immunity from legal obligations.
1 Scope
This International Standard covers the requirements for electrodeposited zinc alloy coatings containing either nickel, cobalt or iron. It provides a method of designating the electrodeposited coatings, chromate conversion coatings and other supplementary treatments.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 2064, Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness
- ISO 2080, Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary
- ISO 2819, Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion
- ISO 3882, Metallic and other inorganic coatings — Review of methods of measurement of thickness
- ISO 4518, Metallic coatings — Measurement of coating thickness — Profilometric method
- ISO 4519, Electrodeposited metallic coatings and related finishes — Sampling procedures for inspection by attributes
- ISO 9587, Metallic and other inorganic coatings — Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
- ISO 9588, Metallic and other inorganic coatings — Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
- ISO 10308, Metallic coatings — Review of porosity tests
- ISO 10309, Metallic coatings — Porosity tests — Ferroxyl test
- ASTM B117, Standard Practice for Operating Salt Spray (Fog) — Apparatus
3 Terms and definitions
For the purpose of this document, the terms and definitions in ISO 2064, ISO 2080, ISO 9587 and ISO 9588 apply.
Bibliography
| [1] | ISO 1463, Metallic and oxide coatings — Measurement of coating thickness — Microscopical method |
| [2] | ISO 2177, Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution |
| [3] | ISO 2178, Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method |
| [4] | ISO 3497, Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods |
| [5] | ISO 3543, Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method |
| [6] | ISO 3613, Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods |
| [7] | ISO 3868, Metallic and other non-organic coatings — Measurement of coating thicknesses — Fizeau multiple-beam interferometry method |
| [8] | ISO 4520, Chromate conversion coatings on electroplated zinc and cadmium coatings |
| [9] | ISO 9220, Metallic coatings — Measurement of coating thickness — Scanning electron microscope method |
| [10] | ISO 9227, Corrosion tests in artificial atmospheres — Salt spray tests |
| [11] | ISO 10111, Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods |
| [12] | ISO 10587, Metallic and other inorganic coatings — Tests for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods — Inclined wedge method |
| [13] | ISO 15724, Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method |
| [14] | ISO 27830, Metallic and other inorganic coatings — Guidelines for specifying metallic and inorganic coatings |
| [15] | ISO 27831-1, Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — 1: Ferrous metals and alloys |
| [16] | ISO 27831-2, Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — 2: Non-ferrous metals and alloys |
| [17] | ASTM B840:1999, Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits |
| [18] | ASTM B841:1999, Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits |
| [19] | ASTM B842:1999, Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits |
| [20] | ASTM E 527, Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| [21] | DIN 50692:1998, Galvanische Überzüge — Chromatierte Zinklegierungsüberzüge auf Eisenwerkstoffen (Electrodeposited coatings — Chromated zinc alloy coatings on iron materials) |
| [22] | Baldwin, K.R., Robinson, M.J. and Smith, C.J.E. The Corrosion Resistance of Electrodeposited Zinc-Nickel Alloy Coatings. Corrosion Science, 35(8) , 1993, p. 1267 |
| [23] | Hall, D.E., Electrodeposited Zinc-Nickel Alloy Coatings — A Review. Plating and Surface Finishing, 70(11) , 1983, p. 59 |
| [24] | Watson, S.A. Zinc-nickel alloy electroplated steel coil for use by the automotive industry. NiDI Review Series No. 13 001, Nickel Development Institute, Toronto, Ontario, Canada, 1988 |
| [25] | Zaki, N. Zinc-Nickel Alloy Plating, Metal Finishing, 76(6) , 1989, p. 57 |
| [26] | Ray, G.P. Thickness testing of electroplated and related coatings, 2nd edn., 1993, Electrochemical Publications Ltd, Isle of Man, UK, ISBN 0 901150 27 4 |