※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www を参照してください。 .iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 17, 鉄鋼、SC 16 小委員会、コンクリートの補強およびプレストレスト用鋼によって作成されました。
ISO 15835 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
1 スコープ
この文書は、鉄筋の機械的接合に使用されるカプラーの認証および自己評価に関する規則を規定します。
これには、カプラーの製造プロセスの管理とメカニカル スプライスの形式での適合性の検証に関する要件が含まれています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 2859-1:1999, 属性による検査のためのサンプリング手順 — Part 1: ロットごとの検査のための合格品質限界 (AQL) によってインデックス付けされたサンプリング スキーム
- ISO 15835-1:— 1 、コンクリート補強用鋼 — 棒のメカニカルスプライス用補強カプラー — Part 1: 要件
- ISO 16020, コンクリートの補強およびプレストレスト用鋼 — 語彙
- ISO/IEC 17000, 適合性評価 - 語彙と一般原則
- ISO/IEC 17025, 試験および校正機関の能力に関する一般要件
- ISO/IEC 17050, 適合性評価 - サプライヤーの適合性宣言
- ISO/IEC 17065, 適合性評価 — 製品、プロセス、およびサービスを認証する機関の要件
3 用語と定義
この文書の目的上、ISO 15835-1, ISO 16020, ISO/IEC 17000 および以下で与えられる用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
スプライスシステム
特定の技術を使用した同じメーカー製のメカニカルスプライス
注記 1: スプライス システムには、複数の スプライス タイプ (3.2) が含まれる場合があります。
3.2
スプライスタイプ
同じ スプライス システム (3.1) からのメカニカル スプライス、同じ汎用設計、同じ目的のために設計され、特定のバー直径に適したさまざまなサイズが存在する
参考文献
| 1 | ISO 9001, 品質マネジメントシステム — 要件 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 16, Steels for the reinforcement and prestressing of concrete.
A list of all the parts in the ISO 15835 series can be found on the ISO website.
1 Scope
This document specifies rules for the certification and for the self-evaluation of couplers to be used for the mechanical splicing of steel reinforcing bars.
It includes requirements for the control of the manufacturing process of the couplers and for the verification of their conformity in the form of mechanical splices.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 2859-1:1999, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- ISO 15835-1:— 1 , Steels for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars — Part 1: Requirements
- ISO 16020, Steel for the reinforcement and prestressing of concrete — Vocabulary
- ISO/IEC 17000, Conformity assessment — Vocabulary and general principles
- ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories
- ISO/IEC 17050, Conformity assessment — Supplier’s declaration of conformity
- ISO/IEC 17065, Conformity assessment — Requirements for bodies certifying products, processes and services
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 15835-1, ISO 16020, ISO/IEC 17000 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
splice system
mechanical splice using a specific technology and made by the same manufacturer
Note 1 to entry: A splice system may include several splice types (3.2) .
3.2
splice type
mechanical splices from the same splice system (3.1) , of the same generic design, designed for the same purpose and existing in different sizes suitable for specific bar diameters
Bibliography
| 1 | ISO 9001, Quality management systems — Requirements |