※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 3.
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
この国際規格の一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
国際規格 ISO 15880 は、技術委員会 ISO/TC 35, 塗料およびワニス、小委員会 SC 10, 塗料およびワニスの結合剤の試験方法によって作成されました。
1 スコープ
この国際規格は、MEQ (酸) 値または MEQ (アルカリ) 値のいずれかとして、水ベースのバインダーおよびコーティング材料の MEQ (ミリ当量) 値を決定するための滴定法を指定します。
他の値、例えば酸価、ケン化価またはヒドロキシル価とは対照的に、MEQ 値は常に結合剤またはコーティング材料の不揮発性物質含有量に関連しています。
2 参考文献
次の規範文書には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。日付の記載された参考資料については、これらの刊行物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 3251:1993, 塗料とワニス — 塗料、ワニス、および塗料とワニスのバインダーの不揮発性物質の測定。
- ISO 15528:2000, 塗料、ワニス、および塗料とワニスの原材料 — サンプリング。
3 用語と定義
この国際規格の目的のために、次の用語と定義が適用されます。
3.1
MEQ値
水系塗料またはバインダーの不揮発分100g中に含まれる酸または塩基のミリ当量(MEQ)数
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 15880 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 10, Test methods for binders for paints and varnishes.
1 Scope
This International Standard specifies a titrimetric method for determining the MEQ (milli-equivalent) value of water-based binders and coating materials, either as an MEQ(acid) value or an MEQ(alkali) value.
In contrast to other values, e.g. the acid value, saponification value or hydroxyl value, the MEQ value is always related to the non-volatile matter content of the binder or coating material.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 3251:1993, Paints and varnishes — Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes.
- ISO 15528:2000, Paints, varnishes and raw materials for paints and varnishes — Sampling.
3 Term and definition
For the purposes of this International Standard, the following term and definition applies.
3.1
MEQ value
the number of milli-equivalents (MEQ) of acid or base contained in 100 g of the non-volatile matter of a water-based coating material or binder