この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 15967 は、技術委員会 ISO/TC 102, 鉄鉱石および直接還元鉄、小委員会 SC 3, 物理的試験によって作成されました。
この第 2 版は、他の物理的試験規格と同質化するために改訂された第 1 版 (ISO 15967:2000) を取り消して置き換えます。
序章
この国際規格の試験方法は、高温ブリケット鉄 (HBI) の形の直接還元鉄の耐性を評価するために開発されました。
この試験の結果は、直接還元プロセスの製品の品質を評価するために使用される他の試験と併せて考慮する必要があります。
この国際規格は、製造品質管理システムの一部として、契約の基礎として、または研究プロジェクトの一部として、試験結果を提供するために使用することができます。
この試験で測定された劣化のレベルは、バルク材の船積み、輸送、および取り扱い操作中の HBI 耐性の良い指標であることがわかっています。
注意 この国際規格には、危険な操作および装置が含まれる場合があります。この規格は、その使用に関連するすべての安全問題に対処することを目的としていません。この規格を使用する前に、適切な安全衛生慣行を確立し、規制上の制限の適用可能性を判断するのは、この規格の使用者の責任です。
1 スコープ
この国際規格は、直接還元鉄の衝撃や摩耗によるサイズ劣化に対する耐性を評価するための相対的な尺度を提供する方法を規定しています。
この国際規格は、高温ブリケット アイアン (HBI) のタンブルおよび摩耗指数の決定を指定します。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3310-1:2000, 試験ふるい — 技術要件および試験 — Part 1: 金属ワイヤー クロスの試験ふるい
- ISO 3310-2:1999, 試験ふるい — 技術要件および試験 — Part 2: 有孔金属板の試験ふるい
- ISO 10835:2007, 直接還元鉄および高温ブリケット鉄 — サンプリングおよびサンプル準備
- ISO 11323:2002, 鉄鉱石および直接還元鉄 — 語彙
3 用語と定義
このドキュメントの目的のために、ISO 11323 に記載されている用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15967 was prepared by Technical Committee ISO/TC 102, Iron ore and direct reduced iron, Subcommittee SC 3, Physical testing.
This second edition cancels and replaces the first edition (ISO 15967:2000), which has been revised to homogenise with other physical test standards.
Introduction
The test method in this International Standard has been developed to evaluate the resistance of direct reduced iron in the form of hot briquetted iron (HBI).
The results of this test should be considered in conjunction with other tests used to evaluate the quality of products of direct reduction processes.
This International Standard may be used to provide test results as part of a production quality-control system, as a basis of a contract, or as part of a research project.
The level of degradation measured in this test has been found to be a good indication of HBI resistance during ship loading, transport and handling operations for bulk materials.
CAUTION This International Standard may involve hazardous operations and equipment. This standard does not purport to address all of the safety issues associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to its use.
1 Scope
This International Standard specifies a method to provide a relative measure for evaluating the resistance of direct reduced iron to size degradation by impact and abrasion.
This International Standard specifies the determination of the tumble and abrasion indices of hot briquetted iron (HBI).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3310-1:2000, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth
- ISO 3310-2:1999, Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate
- ISO 10835: 2007, Direct reduced iron and hot briquetted iron — Sampling and sample preparation
- ISO 11323:2002, Iron ore and direct reduced iron — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 11323 apply.