※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 15988 は、技術委員会 ISO/TC 61, プラスチック、小委員会 SC 11, 製品によって作成されました。
1 スコープ
この国際規格は、主に包装に使用される二軸延伸透明ポリエチレンテレフタレート (PET) フィルムを規定しています。
注記二軸延伸透明 PET フィルムは、単独で、または他のフィルムと積層して使用されます。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 291:1997, プラスチック — 調整および試験用の標準雰囲気
- ISO 527-3:1995, プラスチック — 引張特性の測定 — Part 3: フィルムおよびシートの試験条件
- ISO 4593:1993, プラスチック — フィルムおよびシート — 機械的スキャンによる厚さの測定
- ISO 8296:1987, プラスチック — フィルムおよびシート — ぬれ張力の測定
- ISO 14782:1999, プラスチック - 透明材料のヘイズの測定
- ISO 15105-1:2002, プラスチック — フィルムおよびシート — ガス透過率の測定 — Part 1: 差圧法
- ISO 15105-2:2003, プラスチック — フィルムおよびシート — ガス透過率の決定 — Part 2: 等圧法
- ISO 15106-1:2003, プラスチック — フィルムおよびシート — 水蒸気透過率の測定 — Part 1: 湿度検出センサー方法
- ISO 15106-2:2003, プラスチック — フィルムおよびシート — 水蒸気透過率の測定 — Part 2: 赤外線検出センサー法
- ISO 15106-3:2003, プラスチック — フィルムおよびシート — 水蒸気透過率の測定 — Part 3: 電解検出センサー法
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15988 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11, Products.
1 Scope
This International Standard specifies biaxially oriented transparent polyethylene terephthalate (PET) films, mainly used for packaging.
NOTE Biaxially oriented transparent PET films are used alone and/or as laminated film with other films.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 291:1997, Plastics — Standard atmospheres for conditioning and testing
- ISO 527-3:1995, Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
- ISO 4593:1993, Plastics — Film and sheeting — Determination of thickness by mechanical scanning
- ISO 8296:1987, Plastics — Film and sheeting — Determination of wetting tension
- ISO 14782:1999, Plastics — Determination of haze for transparent materials
- ISO 15105-1:2002, Plastics — Film and sheeting — Determination of gas-transmission rate — Part1: Differential-pressure method
- ISO 15105-2:2003, Plastics — Film and sheeting — Determination of gas-transmission rate — Part 2: Equal-pressure method
- ISO 15106-1:2003, Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 1: Humidity detection sensor method
- ISO 15106-2:2003, Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 2: Infrared detection sensor method
- ISO 15106-3:2003, Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 3: Electrolytic detection sensor method