※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 1598 は、ISO/TC 61プラスチック技術委員会によって作成されました。
この第 2 版は、第 1 版 (ISO 1598:1975) を廃止し、置き換えるものであり、そのマイナーリビジョンを構成します。
警告 - この国際規格の使用には、危険な物質、作業、および機器が含まれる可能性があります。この規格は、その使用に関連するすべての安全上の問題に対処することを目的とするものではありません。適切な安全衛生慣行を確立し、使用前に規制上の制限の適用可能性を判断することは、この規格のユーザーの責任です。
1 スコープ
この国際規格は、酢酸セルロース中の、フタル酸ジメチル、ジクロロメタン、メタノールの混合物に不溶で、サイズが 0.15 mm 以上の目に見える粒子 (あらゆる種類の汚れや黒い汚れを含む) の数を測定する方法を規定しています。
この方法は、酢酸収率が 50% を超え、試験結果に影響を与える添加剤を含まない酢酸セルロースを対象としています。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 565:1990, 試験用ふるい - 金属ワイヤークロス、穴あき金属板および電鋳シート - 開口部の公称サイズ。
- ISO 585:- 1) 、プラスチック - 非可塑化酢酸セルロース - 水分含有量の測定。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 1598 was prepared by Technical Committee ISO/TC 61, Plastics.
This second edition cancels and replaces the first edition (ISO 1598:1975), of which it constitutes a minor revision.
WARNING - The use of this International Standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1 Scope
This International Standard specifies a method for the determination of the number of visible particles (including all kinds of contamination and black dirt) in cellulose acetate which are insoluble in a mixture of dimethylphthalate, dichloromethane and methanol, and are of size 0,15 mm or larger.
This method is intended for cellulose acetate having an acetic acid yield above 50 % and containing no additives which affect the test results.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 565:1990, Test sieves - Metal wire cloth, perforated metal plate and electroformed sheet - Nominal sizes of openings.
- ISO 585:- 1) , Plastics - Unplasticized cellulose acetate - Determination of moisture content.