※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 16131 は、技術委員会 ISO/TC 120, 革、小委員会 SC 2, なめし革によって作成されました。
これは、EN 13336:2004, レザー — 室内装飾用レザーの特性 — 家具用レザーの選択ガイド に基づいています。
1 スコープ
この国際規格は、サンプリングと試験方法を指定し、家具用の室内装飾用皮革の推奨値を示しています。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 105-B02, テキスタイル — 染色堅牢度の試験 — Part B02: 人工光に対する染色堅牢度: キセノン アーク フェージング ランプ試験
- ISO 2418, 皮革 - 化学的、物理的、機械的および堅牢性試験 - サンプリング場所
- ISO 2419, 皮革 — 物理的および機械的試験 — サンプルの準備と調整
- ISO 2588, レザー — サンプリング — 大きなサンプルのアイテム数
- ISO 3377-1, 皮革 — 物理的および機械的試験 — 引き裂き荷重の決定 — Part 1: 片端の引き裂き
- ISO 4044, 皮革 — 化学試験 — 化学試験サンプルの準備
- ISO 4045, 皮革 - 化学試験 - pH の測定
- ISO 5402-1, 皮革 — 屈曲抵抗の測定 — Part 1: フレキソメータ法
- ISO 8191-1, 家具 — 布張り家具の着火性の評価 — Part 1: 着火源: くすぶっているタバコ
- ISO 8191-2, 家具 — 布張り家具の着火性の評価 — Part 2: 着火源: マッチの炎と同等
- ISO 11640, レザー — 染色堅牢度のテスト — 往復摩擦に対する染色堅牢度
- ISO 11641, レザー — 色堅牢度のテスト — 汗に対する色堅牢度
- ISO 11644, レザー — 仕上げの接着性試験
- ISO 15700, レザー — 色堅牢度のテスト — ウォータースポットに対する色堅牢度
- ISO 17233, 皮革 — 物理的および機械的試験 — 表面コーティングの低温亀裂温度の決定
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16131 was prepared by Technical Committee ISO/TC 120, Leather, Subcommittee SC 2, Tanned leather.
It is based on EN 13336:2004, Leather — Upholstery leather characteristics — Guide for selection of leather for furniture.
1 Scope
This International Standard specifies sampling and test methods, and gives recommended values for, upholstery leather for furniture.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 105-B02, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
- ISO 2418, Leather — Chemical, physical and mechanical and fastness tests — Sampling location
- ISO 2419, Leather — Physical and mechanical tests — Sample preparation and conditioning
- ISO 2588, Leather — Sampling — Number of items for a gross sample
- ISO 3377-1, Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear
- ISO 4044, Leather — Chemical tests — Preparation of chemical test samples
- ISO 4045, Leather — Chemical tests — Determination of pH
- ISO 5402-1, Leather — Determination of flex resistance — Part 1: Flexometer method
- ISO 8191-1, Furniture — Assessment of the ignitability of upholstered furniture — Part 1: Ignition source: smouldering cigarette
- ISO 8191-2, Furniture — Assessment of the ignitability of upholstered furniture — Part 2: Ignition source: match-flame equivalent
- ISO 11640, Leather — Tests for colour fastness — Colour fastness to cycles of to-and-fro rubbing
- ISO 11641, Leather — Tests for colour fastness — Colour fastness to perspiration
- ISO 11644, Leather — Test for adhesion of finish
- ISO 15700, Leather — Tests for colour fastness — Colour fastness to water spotting
- ISO 17233, Leather — Physical and mechanical tests — Determination of cold crack temperature of surface coatings