※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自発的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 38, テキスタイル、小委員会 SC 2, クレンジング、仕上げおよび耐水性試験によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 16322-3:2005) を取り消して置き換えるものです。前作からの主な変更点は以下の通り。
- 図 4 を修正しました。
ISO 16322 シリーズのすべての部品のリストは、ISO Web サイトで見つけることができます。
1 スコープ
この文書は、家庭での洗濯後の織編物衣類のらせん度またはトルクを測定する手順を指定しています。
異なる手順から得られた結果は比較できない場合があります。
この文書は、製造時の衣類の螺旋度を測定することを意図したものではなく、家庭で洗濯した後の螺旋度を測定することを意図しています.
注記デニムなど一部の生地構造では、製造中に意図的にらせん状にすることができます。丸編み機で作られた生地で作られた衣服は、クジラの配置の固有の非垂直性を持っている可能性があります.
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1
らせん性
ねじれ
<衣服内>衣服を形成する織物または編物の洗濯中に潜在的な応力が解放されることにより生じる、衣服の異なるパネル間の通常は横方向の回転
注記 1:この現象は、デニム ジーンズのレッグ ツイストのように、ツイストと呼ばれることもあります。
参考文献
| [1] | ISO 16322-2:2021, テキスタイル — 洗濯後の螺旋度の測定 — 2: 織編物 |
| [2] | AATCC TM179, 家庭洗濯後の生地の歪み変化の試験方法 |
| [3] | AATCC TM207, 家庭洗濯前後の衣服の縫い目のねじれの試験方法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2, Cleansing, finishing and water resistance tests.
This second edition cancels and replaces the first edition (ISO 16322-3:2005), which has been technically revised. The main changes compared to the previous editions are as follows:
- Figure 4 has been corrected.
A list of all parts in the ISO 16322 series can be found on the ISO website.
1 Scope
This document specifies procedures to measure the spirality or torque of woven and knitted garments after domestic laundering.
The results obtained from different procedures might not be comparable.
This document is not intended to measure the spirality of garments as manufactured, but rather the spirality after domestic laundering.
NOTE Some fabric constructions, such as denim, can have spirality intentionally introduced during manufacturing. Garments made of fabrics from circular knitting machines can have inherent nonverticality of wale alignment.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 139, Textiles — Standard atmospheres for conditioning and testing
- ISO 6330, Textiles — Domestic washing and drying procedures for textile testing
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
spirality
torque
<in garments>rotation, usually lateral, between different panels of a garment resulting from the release of latent stresses during laundering of the woven or knitted fabric forming the garment
Note 1 to entry: The phenomenon is sometimes referred to as twist, for example, denim jean leg twist.
Bibliography
| [1] | ISO 16322-2:2021, Textiles — Determination of spirality after laundering — 2: Woven and knitted fabrics |
| [2] | AATCC TM179, Test Method for Skew Change in Fabrics After Home Laundering |
| [3] | AATCC TM207, Test Method for Seam Twist in Garments Before and After Home Laundering |