※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 1641-2 は、技術委員会 ISO/TC 29, 小型工具、小委員会 SC 2, 高速度鋼切削工具およびその付属品によって作成されました。
この第 2 版は、第 1 版 (ISO 1641-2:1978) を廃止し、置き換えるものであり、そのマイナーリビジョンを構成します。特に、これには、規格参照の更新、指定の追加 (第 4 項を参照)、ISO 2768-1 および ISO 2768-2 に準拠した公差クラスの表示が含まれます。
ISO 1641 は、一般タイトル「エンドミルおよびスロットドリル」の下に、次の部分で構成されています。
- Part 1: 円筒シャンクのフライス
- Part 2: モールステーパシャンク付きフライスの寸法と呼び方
- Part 3: 7/24 テーパーシャンクを備えたフライスの寸法と名称
1 スコープ
ISO 1641 のこの部分では、モールステーパとタップ穴を備えた以下のフライスカッターの一般的な寸法と名称を指定します。
- エンドミル、フラットエンドまたはボールノーズ - 標準シリーズおよびロングシリーズ。
- スロット ドリル — ショート シリーズと標準シリーズ。
モールステーパーシャンクは ISO 296 および ISO 5413 に準拠しています。
ISO 1641-1で扱われる円筒シャンクのエンドミルやスロットドリルには適用されません。 ISO1641-3で扱われる7/24テーパーシャンクのものには適用されません。
ISO 1641 のこの部分は、固体超硬合金のエンドミルやスロット ドリルには適用されません。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 296, 工作機械 — 工具シャンク用自己保持テーパー
- ISO 2768-1, 一般公差 — Part 1: 個別の公差の表示がない直線寸法および角度寸法の公差
- ISO 2768-2, 一般公差 - Part 2: 個別公差の表示がない形状の幾何公差
- ISO 5413, 工作機械 — モールステーパのポジティブドライブ
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 1641-2 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 2, High speed steel cutting tools and their attachments.
This second edition cancels and replaces the first edition (ISO 1641-2:1978), of which it constitutes a minor revision. In particular, this includes updating of the normative references, addition of the designation (see Clause 4) and indication of the tolerance classes in accordance with ISO 2768-1 and ISO 2768-2.
ISO 1641 consists of the following parts, under the general title End mills and slot drills:
- Part 1: Milling cutters with cylindrical shanks
- Part 2: Dimensions and designation of milling cutters with Morse taper shanks
- Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks
1 Scope
This part of ISO 1641 specifies the general dimensions and designation of the following milling cutters with Morse taper and having a tapped hole:
- end mills, flat-ended or ball-nosed — standard series and long series;
- slot drills — short series and standard series.
Morse taper shanks are in accordance with ISO 296 and ISO 5413.
It is not applicable to the end mills and slot drills with cylindrical shank, which are dealt with in ISO 1641-1; it is not applicable to those with 7/24 taper shank, which are dealt with in ISO 1641-3.
This part of ISO 1641 is not applicable to solid hardmetal end mills and slot drills.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 296, Machine tools — Self-holding tapers for tool shanks
- ISO 2768-1, General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
- ISO 2768-2, General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
- ISO 5413, Machine tools — Positive drive of Morse tapers