この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 16900-3 は、ISO/TC 94 技術委員会「個人の安全 - 防護服および装備」 、分科会 SC 15 「呼吸器保護装置」によって作成されました。
ISO 16900 は、 「呼吸用保護具 - 試験方法および試験装置」という一般タイトルの下に、次の部分で構成されています。
- Part 1: 内部漏れの判定
- Part 2: 呼吸抵抗の決定
- Part 3: 粒子フィルターの透過率の決定
- Part 4: ガスフィルターの容量の決定、移行、脱着、一酸化炭素の動的試験
- Part 11: 視野の決定
以下の部分が準備中です。
- Part 5: 呼吸器/代謝シミュレーター/RPD ヘッドフォーム/トルソー、ツールおよびトランスファー標準
- Part 8: RPD 空気流量の測定
- Part 10: 発火、炎、輻射熱、熱に対する耐性
- Part 12: 容積平均呼吸仕事量とピーク呼吸圧の決定
導入
ISO 16900 のこの部分は、呼吸保護装置 (RPD) の性能規格 ISO 17420 (すべての部分) を補足することを目的としています。試験方法は、ISO 17420 に準拠することを目的とした完全なデバイスまたはデバイスの一部に対して指定されます。ISO 16900 のこの部分に示されている試験方法からの逸脱が必要な場合、これらの逸脱は ISO 17420 で特定されます。
1 スコープ
ISO 16900 のこの部分では、呼吸用保護具用の個別フィルターまたは一体型フィルターの粒子フィルター透過性の試験方法を指定しています。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
この文書の目的には、ISO 16972 で与えられる用語と定義が適用されます。
参考文献
| 1 | ISO 15900, 粒子サイズ分布の測定 — エアロゾル粒子の微分電気移動度分析 |
| 2 | ISO 16900‑8, 呼吸用保護具 — 試験方法および試験装置 — Part 8: RPD 空気流量の測定1 |
| 3 | ISO 1742, 呼吸用保護具 — 性能要件2 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16900-3 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices.
ISO 16900 consists of the following parts, under the general title Respiratory protective devices — Methods of test and test equipment:
- Part 1: Determination of inward leakage
- Part 2: Determination of breathing resistance
- Part 3: Determination of particle filter penetration
- Part 4: Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing
- Part 11: Determination of field of vision
The following parts are under preparation:
- Part 5: Breathing machine/metabolic simulator/RPD headforms/torso, tools and transfer standards
- Part 8: Measurement of RPD air flow rates
- Part 10: Resistance to ignition, flame, radiant heat and heat
- Part 12: Determination of volume averaged work of breathing and peak respiratory pressures
Introduction
This part of ISO 16900 is intended as a supplement to the respiratory protective devices (RPD) performance standard ISO 17420 (all parts). Test methods are specified for complete devices or parts of devices that are intended to comply with ISO 17420. If deviations from the test method given in this part of ISO 16900 are necessary, these deviations will be specified in ISO 17420.
1 Scope
This part of ISO 16900 specifies the test methods for particle filter penetration of separate or integral filters for respiratory protective devices.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 16972, Respiratory protective devices — Terms, definitions, graphical symbols and units of measurement
- ISO 21748, Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 16972 apply.
Bibliography
| 1 | ISO 15900, Determination of particle size distribution — Differential electrical mobility analysis for aerosol particles |
| 2 | ISO 16900‑8, Respiratory protective devices — Methods of test and test equipment — Part 8: Measurement of RPD air flow rates 1 |
| 3 | ISO 17420 (all parts), Respiratory protective devices — Performance requirements 2 |