※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 17087 は、技術委員会 ISO/TC 61, プラスチック、小委員会 SC 11, 製品によって作成されました。
ASTM の許可を得て、ASTM D 5572, 非構造製材製品のフィンガー ジョイントに使用される接着剤の標準仕様に基づきます。
1 スコープ
この国際規格は、非構造用集成材製品のフィンガー ジョイントに使用される接着剤の性能レベルを規定しています。このような製品には、内装および外装のモールディング、窓およびドアの構成部品または部品、および接着木材パネルが含まれますが、これらに限定されません。さまざまな性能クラスの要件を満たす接着剤は、クラスに記載されている条件下での使用に十分な接着力を提供できると考えられています。この仕様は、接着剤および指関節の接着結合を評価するために使用することを意図しています。
2 参考文献
次の参照文書は、この規格の適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 7500-1, 金属材料 — 静的一軸試験機の検証 — Part 1: 引張/圧縮試験機 — 力測定システムの検証と校正
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
債券
接着剤を使用して製造された材料間の結合
3.2
指の関節
図 1 —指の関節
a)水平ジョイント | b)縦目地 |
Key
| 1 | 顔 |
| 2 | 縁 |
3.3
乾式非構造用接着剤
木材の平衡含水率 (EMC) が 16% を超えない条件下で、接着木材製品を非構造用途に使用できるようにするのに十分な強度と耐久性を生み出すことができる接着剤。
3.4
湿式非構造接着剤
木材の EMC が 16% 以上になる可能性がある条件下で、接着された製材製品を非構造用途で使用できるようにするのに十分な強度と耐久性を生み出すことができる接着剤。
3.5
平衡水分量
EMC
木材が周囲の空気に対して水分を得ることも失うこともない含水率
グレード 1 から初級: ASTM D 9 に準拠。
3.6
水分含量
MC
木材に含まれる水の量。通常、オーブンで乾燥させた木材の質量のパーセンテージとして表されます。
グレード 1 から初級: ASTM D 9 に準拠。
参考文献
| [1] | ASTM D 9, 木材および木材製品に関する標準用語 |
| [2] | ASTM D 5266, 接着接合部における木材破損率を推定するための標準プラクティス |
| [3] | ASTM D 5572, 非構造材製品のフィンガー ジョイントに使用される接着剤の標準仕様 |
| [4] | EN 13183-2, 製材片の水分含有量 — Part 2: 電気抵抗法による推定 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17087 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11, Products.
Based with permission of ASTM, on ASTM D 5572, Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products.
1 Scope
This International Standard specifies performance levels for adhesives to be used in finger joints in nonstructural bonded lumber products. Such products include, but are not limited to, interior and exterior mouldings, window and door components or parts, and bonded lumber panels. Adhesives that meet the requirements of the various performance classes are considered capable of providing an adequate bond for use under the conditions described for the class. This specification is intended to be used to evaluate adhesives as well as the adhesive bonds in the finger joints.
2 Normative references
The following referenced documents are indispensable for the application of this International Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 7500-1, Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
bond
union between materials produced using adhesives
3.2
finger joint
Figure 1—Finger joint
a)Horizontal joint | b)Vertical joint |
Key
| 1 | face |
| 2 | edge |
3.3
dry-use nonstructural adhesive
adhesive capable of producing sufficient strength and durability to make the bonded lumber product serviceable in nonstructural use, under conditions in which the equilibrium moisture content (EMC) of the wood does not exceed 16 %
3.4
wet-use nonstructural adhesive
adhesive capable of producing sufficient strength and durability to make the bonded lumber product serviceable in nonstructural use, under conditions in which the EMC of the wood may be 16 % or greater
3.5
equilibrium moisture content
EMC
moisture content at which wood neither gains nor loses moisture to the surrounding air
Note 1 to entry: Adapted from ASTM D 9.
3.6
moisture content
MC
amount of water contained in the wood, usually expressed as a percentage of the mass of the oven-dry wood
Note 1 to entry: Adapted from ASTM D 9.
Bibliography
| [1] | ASTM D 9, Standard Termninology Relating to Wood and Wood-Based Products |
| [2] | ASTM D 5266, Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
| [3] | ASTM D 5572, Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
| [4] | EN 13183-2, Moisture content of a piece of sawn timber — Part 2: Estimation by electrical resistance method |