※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、次の URL を参照してください。 www.iso.org/iso/foreword.html
この文書は ISO/TC 36, 映画撮影技術委員会によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 17266:2002) を廃止し、置き換えるものです。
1 スコープ
この文書は、35 mm および 70 mm の映画プリントおよびネガ上のマルチチャンネルのアナログおよびデジタル写真サウンド レコードおよびコントロール トラックの横方向および該当するwhere 縦方向の位置と幅の寸法を指定します。
2 規範的参照
この文書には規範的な参照はありません。
3 用語と定義
この文書には用語や定義は記載されていません。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO 7343:1993, 映画撮影 - 35 mm 映画プリント上の 2 トラック写真サウンド記録 - 位置と幅の寸法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 36, Cinematography.
This second edition cancels and replaces the first edition (ISO 17266:2002), which has been technically revised.
1 Scope
This document specifies the lateral, and vertical where applicable, positions and width dimensions of multichannel analogue and digital photographic sound records and control tracks on 35 mm and 70 mm motion-picture prints and negatives.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| 1 | ISO 7343:1993, Cinematography — Two-track photographic sound records on 35 mm motion-picture prints — Positions and width dimensions |